Deck Garden Irrigation Kit - Medium

This system connects easily to any standard outdoor hose faucet.

Step 1: The Header (Faucet Assembly)
If you purchased the kit with a Timer, attach the Timer to the faucet first. Next, screw on the Filter, then the Pressure Regulator, and finally the Easy Loc Female Hose Start. This entire assembly is commonly referred to as the Header.

Step 2: Lay the Mainline
Run the 1/2" Mainline Tubing from the Header around the perimeter of your deck or patio. Use the Easy Loc Tee or Coupler to navigate corners or branch off to different sections. Close the end with a Figure 8 End or End Cap.

Step 3: Connect the Containers
Use the included Pocket Punch to punch a hole in the Mainline near each pot group. Insert a 1/4" Transfer Barb and attach the 1/4" Micro Tubing to run up to the pot or planter box.

Step 4: Choose Your Emitter
For large planters, connect the 1/4" Soaker Dripline to create a loop around the plant base. For smaller pots, use a Stake Emitter (Pot Dripper) for a direct single-point water source. Secure everything with the included Hold Down Stakes.

For detailed assembly instructions click here, or for more detailed plans see the downloads section below.

System Specifications

What's In The Box

We've included every component needed for a comprehensive installation. Click any item to view details or purchase spares.

Is this kit easy to install?
Yes! Despite its larger capacity, this kit uses the same simple "Easy Loc" and push-together fittings as our smaller kits. It requires no glue or special tools, just a little more time to lay out the additional tubing.

Can I use this for both pots and hanging baskets?
Absolutely. The 1/4" Micro Tubing is perfect for running up posts or walls to reach hanging baskets. You can use the Soaker Dripline for baskets and the Pot Drippers for standard containers on the same line.

How many pots can I actually water?
The kit comes with 80 individual Pot Drippers and enough Soaker Dripline for many more. The system capacity (flow rate) can support up to 180 pots if you purchase additional drippers or tubing.

Can I automate this system?
Yes. We highly recommend adding a battery-operated timer at the faucet. Because the timer adds weight to the faucet, we recommend using a high-pressure hose extension to relieve stress on the spigot.