1/2" Compression
If you don't mind doing a little work, the 1/2 inch compression fittings for drip irrigation from DripWorks offer an affordable solution for many applications. These are the lowest-cost fittings for 1/2" tubing. A compression fitting requires neither glue nor clamps, but it does demand a bit more effort to install than other fittings. These fittings hold very well up to 70 PSI.
If you're searching for polyethylene tubing compression fittings, you'll find a wide assortment of products to help you adapt your watering system to your environment. Whether you're looking for a 1/2" irrigation coupler, a compression elbow or compression cross, you'll find what you're looking for here. We also have compression Raindrip fittings on this page, including a Raindrip universal adapter coupler.
Compatible with 1/2" drip tubing .680"-.720" OD.
-
1/2" Compression Female Hose Start
$1.29 -
1/2" Compression Coupler
$0.69 -
3/4"x 1/2" Reducing Coupler
$1.59 -
1/2" Compression Male Hose End Cap
$0.89 -
Hose Cap
$0.35 -
Female Hose Plug
$1.49 -
1/2" Figure 8 End
$0.25 -
1/2" Compression Female Hose Start Elbow
$1.59 -
1/2" Compression Female Hose Start Tee
$1.49 -
1/2" Compression Tee
$0.95 -
3/4"x 3/4"x 1/2" Reducing Tee
$2.49 -
1/2" Compression x 1/4" Barb
$1.19 -
1/2" Compression Elbow
$0.89 -
1/2" Compression Cross
$3.42 -
1/2" Coupler w/Valve
$1.79 -
1/2" Compression Male Hose End
$0.65 -
1/2" Compression Male Hose Tee
$1.39 -
1/2" Compression x 3/4" FPT
$1.59 -
1/2" Compression x 3/4" MPT
$0.65 -
1/2" Compression Adapter
$0.20 -
1/2" Compression x 3/4" Slip Adapter
$0.59 -
1/2" Compression Coupling Adapter
$0.59 -
Raindrip x 1/2" Compression
Starting at:$0.29 -
Screen Washer
$0.69