Hand-watering container gardens, deck plants, or widely spaced shrubs is a daily chore that wastes water and time. The Individual Plant Drip Irrigation Kit is the efficient solution designed to spot-water up to 140 individual plants automatically. This complete package delivers water exactly where your plants need it—at the root zone—eliminating runoff and evaporation.
Unlike soaker systems that water a continuous line, this easy-to-install DIY kit utilizes spot emitters (drippers). You simply punch a hole in the mainline, run the 1/4" micro tubing to your pot or shrub, and stake the emitter in place. It requires no glue or clamps; our "Easy Loc" fittings twist and lock for a watertight seal in seconds.
Perfect for patio gardens, rose bushes, or newly planted trees, this system promotes deep root growth and healthier foliage. To keep your garden hose free for other tasks like washing the car, we highly recommend adding a Brass Y-Splitter to your order, allowing you to run your irrigation system and a standard hose from the same faucet.
This system connects easily to any standard outdoor hose faucet.
Step 1: The Header (Faucet Assembly)
Start at the faucet. Attach the Filter first to protect your drippers from clogging, then the Pressure Regulator, and finally the Easy Loc Female Hose Start. If using a timer, attach it to the faucet before the filter.
Step 2: Lay the Mainline
Run the 1/2" Mainline Tubing past the plants you wish to water. This tubing can be hidden behind pots, under mulch, or buried shallowly. Close the end of the line with the Figure 8 End.
Step 3: Punch and Connect
Use the included Pocket Punch to make a hole in the Mainline near each plant. Insert a 1/4" Transfer Barb into the hole, then attach a length of 1/4" Micro Tubing long enough to reach the base of the plant.
Step 4: Place the Emitter
Push a Dripper (Emitter) into the end of the micro tubing. Secure the tubing in the pot or soil using a Hold Down Stake. Repeat for up to 140 plants.
For detailed assembly instructions click here, or check the downloads section below.
| Specification | Details |
|---|---|
| Maximum Capacity | 140 Plants |
| Emitter Type | Take-Apart Emitters (1, 2, & 4 GPH) |
| Operating Pressure | Regulated to 30 PSI (Regulator Included) |
| Mainline Tubing | 1/2" Polyethylene (0.600" ID x 0.700" OD) |
| Fittings Type | Easy Loc (Mainline) & Barbed (Micro) |
We've included every component needed for a standard installation. Click any item to view details or purchase spares.
| Qty | Item Description | SKU |
|---|---|---|
| 1 | 100' Roll 1/2" Mainline Tubing | 12100 |
| 2 | 100' Rolls 1/4" Micro Tubing | 14100 |
| 100 | Take-Apart Emitters, 1 GPH | DTA1 |
| 20 | Take-Apart Emitters, 2 GPH | DTA2 |
| 20 | Take-Apart Emitters, 4 GPH | DTA4 |
| 10 | 1/4" Transfer Barbs (10-Pack) | 14TB-10 |
| 100 | 1/4" Bug Plugs | 14BUG |
| 20 | 1/4" Goof Plugs (2 x 10 packs) | 14GP2-10 |
| 1 | 1/2" Easy Loc Female Hose Beginning | ELFH |
| 3 | 1/2" Easy Loc Tee | ELT |
| 1 | 1/2" Easy Loc Elbow | ELL |
| 1 | 1/2" Easy Loc Coupler | ELC |
| 3 | 1/2" Figure 8 Ends | CF8 |
| 1 | 1/2" Easy Loc End Cap | ELMC |
| 1 | Home Garden Filter | FYCH200 |
| 1 | 30 PSI Pressure Regulator | PRSG30 |
| 1 | Pocket Punch | PUPKT |
| 40 | 1/4" Hold Downs (4 x 10 packs) | SS3-10 |
| 20 | 1/2" Hold Downs (2 x 10 packs) | SUHD-10 |
Can I use this for potted plants on a deck?
Yes! This kit is ideal for decks and patios. You can run the 1/2" mainline along the edge of the deck or under the railing and run the thin 1/4" micro tubing to each pot.
How much water will my plants get?
The included drippers generally deliver about 1 Gallon Per Hour (GPH). This provides a slow, steady soak that is perfect for most container plants and shrubs.
Can I bury the tubing?
You can cover the tubing with mulch or soil to hide it. However, we recommend leaving the emitters exposed or just lightly covered to ensure they don't get clogged with dirt.
Is it expandable?
While this kit is designed as a complete system for up to 140 plants, you can customize the layout significantly. However, for systems that exceed 140 plants, we generally recommend stepping up to our Large Kit or planning for a larger flow rate capacity.
"Saved my deck garden"
"I used to spend 20 minutes every morning watering my pots before work. Installed this kit last spring and my plants have never looked better. The little drippers are super accurate."
- u/PatioPlanter, via r/gardening
"Great for rose bushes"
"I bought this for a line of roses along my fence. The setup was incredibly easy. I didn't need any tools other than the punch they gave me. DripWorks support was helpful when I asked about spacing."
- Mark T., Google Reviews
"Actually high quality"
"Most of these small kits you buy online are cheap plastic that breaks in a year. This tubing is the real deal thick poly. I've had mine out for two winters now and no leaks."
- GreenThumb55, Independent Forum
| Feature | Small Kit | Medium Kit | Large Kit |
|---|---|---|---|
| Plant Capacity | Up to 60 Plants | Up to 140 Plants | Up to 280 Plants |
| Take-Apart Emitters | 60 | 140 | 280 |
| Mainline Tubing | 50 ft (1/2") | 100 ft (1/2") | 250 ft (3/4") |
| Micro Tubing | 100 ft (1/4") | 200 ft (1/4") | 500 ft (1/4") |
| Is it Expandable? |
Yes, you can add emitters that add up to 100 GPH for example:
|
No | No |
| Ideal For | Patios & Small Gardens | Landscapes | Large Orchards |
Before you buy, check your setup:
Enhance your system with these recommended components:
Feb 9th 2026
Feb 5th 2026
Feb 4th 2026
Feb 3rd 2026
