10 Edible Wild Plants You Can Safely Forage This Spring
Feb 12th 2026
Spring foraging reconnects you to nature and your local landscape after a long winter indoors. It's
…
See More
Maintaining a large landscape of up to 60 individual plants requires serious watering infrastructure. The Large Rose & Shrub Drip Irrigation Kit is the high-capacity solution designed for expansive gardens. Unlike smaller kits, this system upgrades your main supply line to 3/4" Mainline Tubing, ensuring consistent pressure and flow reaches every single shrubbler, even at the furthest end of your garden.
This comprehensive kit includes 60 Pressure Compensating Shrubblers, the gold standard for watering individual bushes and trees. These adjustable emitters allow you to dial in the exact water volume for each plant—from a small drip for new plantings to a full 12-inch umbrella spray for established roses. The included 250 feet of mainline tubing gives you the reach to cover substantial ground without losing performance.
We have engineered this system for high volume. Because of its capacity, we strongly recommend pairing it with a High Flow Bluetooth Timer (at least 8 GPM) to automate your watering without restricting the flow. Standard hose timers may not allow enough water through to operate all 60 shrubblers simultaneously.
This system connects to a standard outdoor faucet but uses larger 3/4" components for better flow.
Step 1: The Header (Faucet Assembly)
Attach your high-flow timer (optional) to the faucet. Next, screw on the Home Garden Filter, then the 30 PSI Pressure Regulator, and finally the 3/4" Easy Loc Female Hose Start. This creates your "Header" assembly.
Step 2: Lay the Mainline
Run the 3/4" Mainline Tubing from the Header through your landscape. The 3/4" size minimizes friction loss over long distances. Use the 3/4" Easy Loc Tees and Elbow to navigate the layout. Close open ends with the 3/4" End Caps.
Step 3: Connect the Plants
Use the included Punch N' Cut Tool to punch a hole in the 3/4" Mainline near each plant. Insert a 1/4" Transfer Barb and attach a length of 1/4" Micro Tubing to run to the plant's base.
Step 4: Install the Shrubbler
Push a Pressure Compensating Shrubbler into the end of the micro tubing and stake it next to the plant. Twist the cap to adjust the flow pattern to match the plant's root zone.
For detailed assembly instructions click here, or for more detailed plans see the downloads section below.
| Specification | Details |
|---|---|
| Maximum Coverage | 60 Plants (Roses, Shrubs, or Small Trees) |
| Emitter Type | Pressure Compensating Shrubblers |
| Operating Pressure | Regulated to 30 PSI (Included) |
| Mainline Tubing | 3/4" Polyethylene (High Flow Capacity) |
| Fittings Type | 3/4" Easy Loc (Mainline) & Barbed (Micro) |
We've included every component needed for a large-scale installation. Click any item to view details or purchase spares.
| Qty | Item Description | SKU |
|---|---|---|
| 1 | 250' Roll 3/4" Mainline Tubing | 34250 |
| 2 | 100' Rolls 1/4" Micro Tubing | 14100 |
| 6 | Pressure Compensating Shrubblers(10-Pack) | DSHPCS-10 |
| 7 | 1/4" Transfer Barbs (10-Packs) | 14TB-10 |
| 1 | 1/4" Goof Plugs (10-Pack) | 14GP2-10 |
| 1 | 3/4" Easy Loc Female Hose Start | ELFH34 |
| 3 | 3/4" Easy Loc Tee | ELT34 |
| 1 | 3/4" Easy Loc Elbow | ELL34 |
| 2 | 3/4" Easy Loc Coupler | ELC34 |
| 4 | 3/4" Easy Loc End Caps | ELMC34 |
| 1 | Home Garden Filter | FYCH200 |
| 1 | Senninger 30 PSI Pressure Regulator | PRL30 |
| 1 | Punch N' Cut Tool | PUPNC |
| 6 | 1/4" Hold Downs (10-Packs) | SS3-10 |
| 5 | U-Shaped Wire Hold Downs (10-Packs) | SUHD-10 |
Why does this kit use 3/4" tubing?
Standard 1/2" tubing can run out of flow capacity when watering 60 plants simultaneously. The 3/4" Mainline acts like a larger highway for water, ensuring the last shrubbler gets the same pressure as the first.
Do I need a special timer?
Yes. Because this system flows more water (high GPM), standard timers may restrict the flow and reduce performance. We recommend the Galcon High Flow Timer for optimal results.
How do I cut the 3/4" tubing?
The included Punch N' Cut Tool is designed to easily slice through the durable 3/4" polyethylene tubing, making installation simple without the need for saws or heavy shears.
Is it expandable?
This kit maximizes the capacity of a standard residential faucet zone (approx. 360-480 GPH). Expanding significantly beyond 60 shrubblers may require splitting your garden into two separate zones to maintain proper pressure.
"Amazing product"
"I have to admit I was overwhelmed when I opened this. But as I began laying it out (with the help of my grown son) it all came together. My 250 roses are loving this!!"
- Bob
"Easy to install"
"Great product and easy to install. Everything you need is in the box."
- Sheldon
"Great value"
"I know that the kit will work great. It is getting ready to snow right now. Hope to get it hooked up Soon!"
- Terry M.
| Feature | Small Kit | Medium Kit | Large Kit (This Item) |
|---|---|---|---|
| Capacity | 15 Plants | 30 Plants | 60 Plants |
| Mainline Tubing Included | 50 ft (1/2") | 100 ft (1/2") | 250 ft (3/4") |
| Shrubblers Included | 15 | 30 | 60 |
| Is it Expandable? | Yes | Yes | No (Max Capacity) |
| Ideal For | Small Borders | Medium Gardens | Large Landscapes |
Before you buy, check your setup:
Enhance your system with these recommended components:
Feb 12th 2026
Feb 11th 2026
Feb 10th 2026
Feb 9th 2026