The Ultra Stake with 12" Riser (10 Pack) is the ultimate support system for your micro-irrigation sprays. Designed to elevate micro-sprinklers and misters above foliage, this assembly ensures unobstructed water distribution and maximizes coverage area. It is perfect for flower beds, ground cover, and landscaped gardens where plants might otherwise block a ground-level emitter.
Each unit comes pre-assembled with a sturdy ground stake, a 12-inch semi-rigid riser, and flexible lead tubing with a transfer barb. This "ready-to-install" design allows you to quickly connect to your mainline tubing and thread in your preferred spray head without fumbling with multiple small parts.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Product Type | Stake Assembly with 12" Riser |
| Riser Height | 12 Inches |
| Outlet Thread | 10-32 UNF (Accepts Standard Micro Sprays) |
| Inlet Connection | 1/4" Transfer Barb (on flexible tubing) |
| Material | UV Stabilized HDPE / Polypropylene |
| Pack Quantity | 10 Pack |
| MPN | 205702 |
| Common Brand Names | Teco |
The following 10-32 threaded sprayers fit directly onto this riser:
| Product Name | Spray Pattern / Type |
|---|---|
| Micro-Jet Sprayer (360°) | Full Circle (Stream) |
| Micro-Jet Sprayer (180°) | Half Circle (Stream) |
| Micro-Jet Sprayer (90°) | Quarter Circle (Stream) |
| Mini-Jet, Blue (10 Pack) | Low Flow / Full Circle |
| Mini-Jet, Red (10 Pack) | Medium Flow / Full Circle |
| Mini-Jet, Green (10 Pack) | High Flow / Full Circle |
| Mini-Jet, Black (10 Pack) | Max Flow / Full Circle |
| Spectrum Sprayer | Adjustable Vortex (Select Threaded Base) |
| Shrubblers | Adjustable Stream (Select Threaded Base) |
Install your elevated sprayers in minutes.
Step 1: Attach the Sprayer
Take your chosen 10-32 threaded micro-sprinkler or mister (sold separately) and screw it into the top of the 12" rigid riser. Hand-tighten only.
Step 2: Punch the Mainline
Use a 1/4" punch tool to create a hole in your 1/2" or 3/4" poly mainline tubing near the plant you wish to water.
Step 3: Connect the Barb
Insert the 1/4" transfer barb (located at the end of the Ultra Stake's flexible tubing) into the punched hole. Listen for a "snap" to ensure it is seated.
Step 4: Stake it Down
Push the stake firmly into the soil, ensuring the riser is vertical. Adjust the flow/pattern on your sprayer if applicable.
Verify this stake fits your components:
Complete your irrigation setup with these recommended products:
Apr 2nd 2026
Apr 1st 2026
Mar 31st 2026
Mar 30th 2026
