Ensure your spring garden thrives with the highly economical and reliable Green Mini-Jet Sprayers (10-Pack). Boasting the second-highest water flow in the Mini-Jet family, these sprayers are perfect for deeply watering flower beds, groundcovers, and shrubs. They deliver a consistent, flat spray pattern that effectively covers the root zone while minimizing water on delicate foliage—which is crucial for preventing fungal issues during the damp spring months. Featuring a standard 10-32 threaded base, they easily install directly into 1/4" micro tubing, EZ Stakes, or rigid risers, allowing you to build a highly customized, low-pressure irrigation system in minutes.
Use the chart below to select the precise Green Mini-Jet configuration for your application. Note: Spray radius may vary slightly depending on riser height.
| Pattern | Model | Flow / Radius @ 15 PSI | Flow / Radius @ 30 PSI |
|---|---|---|---|
90° Quarter
|
MSGR90 | 13.8 GPH / 4.5 ft | 19.5 GPH / 6.5 ft |
180° Half
|
MSGR180 | 13.8 GPH / 4.0 ft | 19.5 GPH / 5.5 ft |
300° Full
|
MSGR300 | 13.8 GPH / 5.0 ft | 19.5 GPH / 6.0 ft |
Build your customized micro-sprayer layout quickly and easily.
Step 1: Choose Your Mounting Method
Determine where your sprayer needs to be. You can insert it directly into the end of 1/4-inch micro tubing, thread it into an EZ Stake, or mount it on a rigid riser.
Step 2: Thread the Sprayer
Take the Green Mini-Jet and twist its 10-32 threaded base firmly into your chosen mount until it is securely hand-tight.
Step 3: Position for Coverage
Orient the sprayer head so the desired spray pattern (Quarter, Half, or Full) is pointed directly toward your plants, avoiding paths or garden walls.
Step 4: Regulate Your Pressure
Turn on your system. For the intended flat spray pattern, ensure your system uses a pressure regulator keeping pressure between 15 and 30 PSI. If it creates a fine mist, your pressure is too high.
Are the Green Mini-Jet Sprayers good for new spring plantings?
Yes, the Green Mini-Jet is excellent for spring beds. It delivers a mid-to-high flow of 13.8 to 19.5 GPH in a flat spray that efficiently waters root zones without damaging tender new spring foliage.
By keeping the foliage mostly dry, this flat spray pattern helps protect vulnerable new plants from early-season fungal diseases.
How do I connect the Green Mini-Jet Sprayers to my system?
Each sprayer features a standard 10-32 UNF threaded base. Simply twist them into the end of 1/4-inch micro tubing, rigid risers, pop-up risers, or compatible EZ stakes for a fast, leak-free connection.
What happens if my water pressure exceeds 30 PSI with the Green Mini-Jet?
If system pressure goes above 30 PSI, the Green Mini-Jet's flat spray pattern turns into a fine mist. We highly recommend using a pressure regulator to maintain droplet size and prevent wind drift.
What spray patterns do the Green Mini-Jet Sprayers come in?
The Green Mini-Jet is available in three distinct spray patterns for your garden: a 90-degree quarter circle, a 180-degree half circle, and a 300-degree full circle.
This variety makes it incredibly easy to configure your sprayers along borders, in corners, or in the center of dense flower beds.
Please note the requirements for this unit:
Get the most out of your high-flow micro-sprayers with these necessary accessories:
May 12th 2026
May 11th 2026
May 7th 2026
May 6th 2026
