This large scale MixRite injector is designed to inject highly concentrated solutions into a high flow water line. It is solely powered by the water moving through it, and requires no external power. We recommend installing the MixRite injector on a bypass, this allows for easy cleaning and maintenance.
IMRTF52 (TF5-002) Features:
- Solution is added as water flows through the injector
- Adjustable additive dilution rate .2% to 2%
- Designed for low to medium water flow
- Not designed for strong acids, alkalines or solvents
IMRTF102 (TF10-002) Features:
- Solution is added as water flows through the injector
- Adjustable additive dilution rate .2% to 2%
- Designed for medium water flow
- Not designed for strong acids, alkalines or solvents
IMRTF252 (TF25-002) Features:
- Solution is added as water flows through the injector
- Adjustable additive dilution rate .3 to 2.5%
- Designed for high water flow
- Not designed for strong acids, alkalines or solvents
Smaller-scale MixRite injectors are also available.
MixRite injectors are not rated for use under constant pressure. They must be placed or installed after automated timers or valves.
| Part # | Flow Range | Mix Ratios | Pressure Range (PSI) | Inlet/Outlet |
|---|
| IMRTF52 |
0.1-22 GPM |
0.2% - 2.0% (500:1 - 50:1) |
15 - 120 |
1" MPT |
| IMRTF102 |
2 - 45 GPM |
0.2% - 2.0% (500:1 - 50:1) |
15 - 120 |
1 1/2" MPT |
| IMRTF252 |
9 - 110 GPM |
0.3% - 2.5% (333:1 - 40:1) |
15 - 120 |
2" MPT |
