Micro-Sprinkler/Fogger Hanging Assembly

Build your commercial overhead system with these simple installation steps.

Step 1: Puncture the Mainline
Using a DripWorks key punch tool, create a clean hole in your suspended 1/2-inch or 3/4-inch poly mainline tubing directly above the area you wish to water or cool.

Step 2: Insert the Assembly Barb
Take the top barbed connector of the Hanging Assembly and push it firmly upward into the punched hole in the mainline until it snaps securely into place.

Step 3: Attach Your Emitter
Press your compatible Netafim Micro-Sprinkler or Fogger firmly into the female connector located at the bottom of the assembly, just beneath the stabilizer weight.

Step 4: Check Alignment
Allow the assembly to hang freely. The stabilizer weight will automatically pull the tubing straight down, ensuring your emitter is perfectly plumb over your greenhouse tables.

Is the Netafim Micro-Sprinkler Hanging Assembly required for overhead greenhouse cooling?
Yes, it is necessary to suspend foggers and sprinklers overhead. The built-in stabilizer weight keeps the emitter hanging perfectly plumb, which is mandatory for achieving the uniform water distribution required in commercial setups.

Does the white tubing on the Netafim Hanging Assembly prevent spring algae growth?
Yes, the opaque Super Flex UV White tubing completely blocks sunlight. This stops algae from growing inside the line during the bright spring and summer months, preventing frustrating system clogs.

What lengths does the Netafim Hanging Assembly come in?
It is available in two convenient lengths: 24 inches and 36 inches. This allows you to choose the perfect drop height to position your foggers or sprinklers optimally above your benches.

How do I connect the Netafim Hanging Assembly to my water line?
The assembly features a barbed top connector that pushes directly into a punched hole on your 1/2-inch or 3/4-inch poly mainline tubing. No PVC glue or threading is required.