The 3/4" x 1/2" Easy Loc Reducing Coupler is the ideal solution for stepping down the size of your irrigation mainline. Whether you are extending an existing 3/4" system with 1/2" tubing or branching off to a smaller zone, this fitting ensures a secure, leak-proof connection without the need for glue or clamps. It is frequently used downstream from high-capacity pressure regulators to transition into standard distribution lines.
As one of our most reliable irrigation fittings, the Easy Loc reducing coupler features a locking nut mechanism that tightens over the tubing, providing superior holding power even under pressure fluctuations. Its reusable design makes it perfect for both permanent installations and seasonal systems that need to be reconfigured.
Verify tubing sizes before installation.
| Specification | Details |
|---|---|
| Product Type | Reducing Coupler |
| Connection 1 (Larger Side) | 3/4" Easy Loc (Fits .940" OD Tubing) |
| Connection 2 (Smaller Side) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Operating Pressure | 0 - 60 PSI |
| Material | Polypropylene with UV Stabilizers |
| MPN | A1-HRC86 |
| Common Brand Names | Irritec, Perma-Loc |
Connect two different sizes of tubing in seconds.
Step 1: Prep the Tubing
Ensure both your 3/4" and 1/2" tubing ends are cut squarely and are free of dirt or burrs.
Step 2: Loosen Collars
Rotate the locking collars on both sides of the coupler backwards (towards the center of the fitting) to expose the barbs.
Step 3: Insert Tubing
Push the 3/4" tubing onto the large end and the 1/2" tubing onto the small end. Push until the tubing hits the internal stops.
Step 4: Lock it Down
Twist the locking collars forward over the tubing. Hand-tighten firmly to secure the connection.
Ensure this reducer fits your system:
Finish your mainline installation with these essential components:
Oct 22nd 2026
Oct 21st 2026
Oct 20th 2026
Oct 19th 2026
