Installing your first drip system is incredibly rewarding, but remembering to turn the water off can sometimes be a challenge. The Orbit Single Outlet Wind-Up Timer (62034) is the perfect, economical solution for gardeners who want to safeguard against accidental flooding without investing in a fully automated electronic controller. This mechanical timer attaches directly to your outdoor spigot and operates entirely via a heavy-duty spring mechanism—meaning it requires absolutely zero batteries and no AC power to function.
Operation couldn't be simpler: just turn the oversized, ergonomic grip handle to your desired watering duration (anywhere from 15 to 120 minutes) and walk away. The timer will slowly wind down and automatically shut off the water flow when the time expires, ensuring the water you are trying to conserve is never left running. Designed with a standard Female Hose Thread (FHT) inlet and Male Hose Thread (MHT) outlet, it seamlessly connects to your garden hose or to a standard hose-threaded irrigation filter and pressure regulator to build a complete drip system head assembly.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Controller Type | Mechanical Wind-Up Hose Timer |
| Inlet / Outlet Size | 3/4" Female Hose Thread (FHT) x 3/4" Male Hose Thread (MHT) |
| Run Time Duration | Up to 120 minutes (2 hours) |
| Operating Pressure | 5 to 120 PSI |
| Maximum Flow Rate | Up to 8 Gallons Per Minute (GPM) |
| Power Source | Manual Spring-Wound (No Batteries Required) |
| Brand | Orbit |
| MPN | 62034 |
Get your mechanical hose timer ready in seconds.
Step 1: Attach to Faucet
Thread the Female Hose Thread (FHT) inlet of the timer directly onto your outdoor hose bibb or spigot. Hand-tighten until secure to prevent leaks.
Step 2: Connect Your System
Attach your garden hose, or your drip irrigation head assembly (filter, pressure regulator, and tubing adapter), to the Male Hose Thread (MHT) outlet on the bottom of the timer.
Step 3: Turn on the Water
Open the valve on your outdoor spigot fully. The timer's internal valve will keep the water from flowing until you manually engage it.
Step 4: Set the Timer
Grip the oversized dial and turn it clockwise past the 15-minute mark to engage the spring, then set it to your desired watering duration (up to 120 minutes). Water will begin flowing and will automatically shut off when the dial returns to zero.
Does this timer require any batteries?
No, the Orbit Wind-Up Timer is completely mechanical and requires zero batteries or AC power to operate.
It uses a heavy-duty internal spring mechanism similar to an egg timer to count down and physically close the internal water valve.
Can I program this timer to water automatically every day?
No, this is a manual wind-up timer. It will only run when you physically go outside and turn the dial to your desired time.
If you are looking for a timer that repeats its watering schedule automatically on certain days of the week, you will need to purchase an electronic battery-operated hose timer.
Can I leave the water turned on at the spigot?
Yes, once the timer is securely attached to your spigot, you can leave the faucet turned on. The timer acts as a closed valve holding the pressure back.
Water will only flow through the system when you twist the dial to initiate a countdown.
How should I prepare this timer for freezing winter weather?
To prevent catastrophic freeze damage, you must completely unthread the timer from your outdoor spigot before the first freeze of the season.
Shake out any residual water inside the valve body and store the timer indoors in a garage or shed until spring.
Please note the requirements for this mechanical timer:
Ensure your hose-connected drip irrigation setup is protected and ready to run with these recommended products:
May 29th 2026
May 28th 2026
May 27th 2026
May 26th 2026
