The PVC-Lock Male Adapter is the essential bridge between your rigid PVC piping and threaded irrigation components. Featuring a "push-to-connect" socket on one side and standard Male Pipe Threads (MPT) on the other, this adapter allows you to screw into a valve, filter, or sprinkler and immediately connect your pipe without glue. It is a critical irrigation fitting for building manifolds or connecting system headers, especially when you need to avoid the fumes of solvent welding in tight spaces.
Designed for durability and speed, this fitting utilizes Hydro-Rain's patented stainless steel retainer ring to grip the pipe and an EPDM O-ring for a leak-proof seal. Always remember to apply Thread Sealant Tape to the male threads before installation to ensuring a watertight connection with your threaded components.
Specs for system planning and compatibility.
| Specification | Details |
|---|---|
| Product Type | PVC-Lock Male Adapter |
| Connection 1 | PVC-Lock Push-Fit Socket |
| Connection 2 | Male Pipe Thread (MPT) |
| Body Material | UV-Resistant ABS Plastic |
| Max Pressure | 150 PSI |
| Manufacturer | Hydro-Rain / Orbit |
| MPN (1/2") | PVCL-436-005 |
| MPN (3/4") | PVCL-436-007 |
| MPN (1") | PVCL-436-010 |
Follow this sequence for a leak-free transition.
Step 1: Prepare Threads
Wrap the Male Pipe Threads (MPT) of the adapter with Thread Seal Tape (Teflon tape). Wrap 3-4 times in a clockwise direction.
Step 2: Tighten Adapter
Screw the adapter into your valve, filter, or fitting. Hand-tighten firmly. Do not use pipe wrenches, as excess torque can crack the plastic body.
Step 3: Prep Pipe
Cut your PVC pipe square. Clean off any debris or dirt. Chamfering the edge is recommended to protect the O-ring.
Step 4: Push to Connect
Push the PVC pipe firmly into the adapter's socket until it hits the internal stop. Pull back slightly to engage the stainless steel teeth.
Ensure your connection matches:
Don't forget these essential installation accessories:
Jun 4th 2026
Jun 3rd 2026
Jun 2nd 2026
Jun 1st 2026
