Galcon 6156 "S" DC 6 Station Greenhouse Timer

Get your multi-station greenhouse controller running smoothly.

Step 1: Mount the Controller
Select an appropriate wall or post location inside your greenhouse or outdoors. Use mounting hardware to securely attach the weather-resistant housing in an easily accessible spot.

Step 2: Install Batteries
Open the battery compartment and install two fresh 9-volt industrial alkaline batteries to power the unit.

Step 3: Wire the Valves
Run direct burial wire from the controller to your valve manifold. Connect the wires from your Galcon DC 2-wire latching solenoids into the designated station terminals inside the controller housing.

Step 4: Program Your Zones
Use the interface to set the current time. Choose standard irrigation mode for long watering, or select misting mode to program short cyclical bursts down to 10-second intervals for any of the 6 independent stations.

Does the Galcon 6156S require an electrical outlet?
No, the Galcon 6156S is a DC-powered timer that operates entirely on two 9-volt alkaline batteries. This makes it perfect for remote greenhouses and areas without AC power access.

Because it is battery operated, it must be paired specifically with DC latching solenoids, not standard 24V AC valves.

Can the Galcon 6156S timer be used for seed propagation misting?
Yes, the Galcon 6156S features a specialized cyclical programming mode that allows for precise 10-second watering increments across up to 6 stations, making it highly effective for automating greenhouse misting systems.

This ultra-short duration prevents over-saturation while maintaining ideal humidity levels for delicate seedlings and propagation beds.

Which valves work with the Galcon 6156S controller?
The Galcon 6156S controller is designed specifically to operate Galcon DC 2-wire latching solenoids. It will not work with standard 24V AC valves from other manufacturers, so ensure you have the correct DC components.

This specialized DC system allows the unit to run reliably off of battery power for an entire growing season.

How should I prepare my Galcon 6156S for spring watering?
Prepare the Galcon 6156S for spring by installing two fresh 9-volt alkaline batteries, verifying your valve connections, and programming your cyclical misting or standard irrigation schedule based on current temperatures.

As your seedlings grow or the weather continues to warm, you can easily adjust the run times independently for each of the 6 zones to accommodate changing moisture requirements.