The .620" OD Easy Loc x 3/4" Male Hose Thread adapter creates a secure transition point between your .620" Poly Tubing and any 3/4" Female Hose Thread (FHT) accessory. This versatile fitting is most commonly used at the end of a zone; simply screw on a hose cap to create a removable flush valve, or attach a garden hose for temporary water access.
Designed specifically for .620" OD Poly Tubing (common in Raindrip® systems), this connector uses the reliable Easy Loc locking mechanism. It is one of the most practical irrigation fittings for gardeners who need to adapt their drip line to standard hose threads for maintenance or expansion.
Key details for component compatibility.
| Specification | Details |
|---|---|
| Product Type | Adapter (Tubing to Male Hose Thread) |
| Connection 1 | .620" Easy Loc (Fits .620" OD Tubing) |
| Connection 2 | 3/4" Male Hose Thread (MHT) |
| Operating Pressure | 0 - 60 PSI |
| MPN | A1-H5HT |
| Brand | Irritec, Perma-Loc, Easy-Loc |
Install in seconds without tools.
Step 1: Prepare Tubing
Cut the end of your .620" OD tubing squarely. Ensure the cut is clean and free of burrs.
Step 2: Unlock Fitting
Rotate the Easy Loc collar backwards (towards the threaded end) to expose the internal barb.
Step 3: Insert Tubing
Push the tubing firmly onto the barb until it hits the internal stop. A slight twisting motion helps seat it.
Step 4: Lock it Down
Twist the Easy Loc collar forward over the tubing. Hand-tighten firmly to secure the connection.
Ensure this adapter matches your parts:
Finish your installation with these recommended parts:
Jul 8th 2026
Jul 7th 2026
Jul 6th 2026
Jul 2nd 2026
