The Tape Loc x PVC Adapter is the engineered solution for transitioning from your permanent PVC infrastructure directly to 5/8" drip tape rows. Designed to be solvent-welded (glued) directly into standard PVC fittings, this adapter creates a robust anchor point for your tape system, eliminating the potential leak points often found with threaded connections.
Featuring a high-quality positive locking nut, this fitting mechanically clamps the drip tape over the barb, preventing blowouts even when the tape softens in summer heat. It is one of our most professional irrigation fittings for greenhouse growers and commercial farmers who demand a clean, low-profile manifold setup.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Product Type | Tape Loc x PVC Adapter |
| Connection 1 (Tape) | Tape Loc (Fits 5/8" Drip Tape) |
| Connection 2 (PVC) | PVC Spigot (Fits INSIDE a PVC Socket) |
| Tape Compatibility | Standard 5/8" Drip Tape (Aqua-Traxx, T-Tape) |
| Operating Pressure | 0 - 15 PSI (Do not exceed tape rating) |
| Material | Polypropylene with Carbon Black/UV Stabilizers |
| MPN | A1-T5P1/2 |
| Common Brand Names | Irritec, Perma-Loc, Twist-N-Lok |
Follow these steps to ensure a leak-proof connection.
Step 1: Preparation (PVC Side)
Clean the PVC fitting socket (e.g., Tee or Elbow) and the adapter's spigot end. Apply PVC primer and glue to both surfaces.
Step 2: Connect to PVC
Insert the adapter into the PVC fitting and give it a quarter turn to ensure even glue distribution. Allow to cure fully before pressurizing.
Step 3: Prepare the Tape
Rotate the locking nut backwards (towards the PVC side) to expose the sharp barb. Slide your 5/8" drip tape over the barb until it hits the stop.
Step 4: Lock it Down
Twist the locking nut forward over the tape. Tighten firmly by hand to compress the tape against the barb.
Verify this fitting works for you:
Build a professional manifold with these essential components:
Jun 18th 2026
Jun 17th 2026
Jun 16th 2026
Jun 15th 2026
