The PVC-Lock Removal Tool is the key to the flexibility of the PVC-Lock system. Unlike traditional glued components which are permanent once set, PVC-Lock fittings can be removed and reused if you have this tool. By depressing the internal stainless steel locking teeth, it allows you to pull the pipe free from the fitting. This makes it one of the most valuable irrigation fittings accessories for anyone who wants the ability to modify their system or correct installation errors without cutting pipe.
Available for 3/4" and 1" pipe sizes, these tools are compact and easy to use in tight trenches. Whether you are re-routing a PVC-Lock Tee or simply made a measurement mistake, this tool saves you the cost of buying new fittings.
Specifics for tool selection.
| Specification | Details |
|---|---|
| Product Type | PVC-Lock Disconnect / Removal Tool |
| Material | High-Strength Plastic |
| Compatibility | PVC-Lock Fittings ONLY |
| Manufacturer | Hydro-Rain / Orbit |
| MPN (3/4") | PVCL-TOOL-007 |
| MPN (1") | PVCL-TOOL-010 |
Release a connection in four easy steps.
Step 1: Snap On
Place the Removal Tool onto the PVC pipe near the fitting you want to remove. The open side allows it to snap directly over the pipe.
Step 2: Slide
Slide the tool down the pipe until it makes contact with the PVC-Lock fitting.
Step 3: Push
Push the tool firmly into the fitting socket. This action depresses the internal collet, disengaging the stainless steel teeth from the pipe.
Step 4: Pull
While holding the tool pressed against the fitting, pull the pipe out. Note: The pipe may have scratches from the teeth; if reusing the pipe, we recommend cutting off the scratched section and re-beveling.
Important usage notes:
Keep these items handy for any PVC-Lock project:
Apr 1st 2026
Mar 31st 2026
Mar 30th 2026
Mar 26th 2026
