Stop battling uneven watering, clogged emitters, and water waste. The Netafim Techline CV XR 17mm Emitter Tubing (12" Spacing, 0.92 GPH) is the commercial-grade choice for flawless sub-surface drip irrigation and challenging slope applications. Engineered for decades of maintenance-free performance, this professional dripline features a revolutionary built-in Check Valve (CV) that holds back up to 4.6 feet of elevation. This prevents the low-point drainage that plagues standard systems on hillsides, ensuring that every emitter across your entire zone activates and deactivates at the exact same time.
Designed to be installed with absolute confidence underground, the Techline CV XR utilizes a patented physical root barrier enhanced with Copper Oxide to defend against root intrusion without the use of harsh chemicals. Its advanced pressure-compensating (PC) emitters deliver a precise, high-volume 0.92 GPH flow rate over a wide pressure range, guaranteeing perfect uniformity even on extensive lateral runs up to 298 feet. Coupled with an integrated anti-siphon mechanism and a continuously self-flushing design, it actively repels dirt and debris, making it ideal for well water, commercial landscapes, green roofs, and high-traffic areas. When paired with standard 17mm barbed fittings, you are investing in the ultimate, clog-free watering infrastructure.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Tubing Size | 17mm Diameter (0.66" OD / 0.56" ID) |
| Emitter Spacing | Every 12 Inches |
| Emitter Flow Rate | 0.92 Gallons Per Hour (GPH) Nominal per Emitter |
| Total Flow Rate | 92.5 GPH per 100-foot roll |
| Operating Pressure Range | 14.5 to 58 PSI |
| Check Valve Operation | Opens at 14.5 PSI | Shuts off at 2 PSI (Holds back 4.6' of head) |
| Maximum Run Length | 298 Feet (at an inlet pressure of 60 PSI) |
| Root Intrusion Defense | Embedded Copper Oxide (XR) + Physical Barrier |
| Minimum Bending Radius | 7 Inches |
| Required Filtration | 120 Mesh Minimum |
| Warranty | 7 Years (Tubing), 10 Years (Stress Cracking) |
| Brand | Netafim |
Install your 17mm Netafim Techline correctly for optimal performance.
Step 1: Connect to Source
Connect the tubing to your water source. Ensure your head assembly includes a 120-mesh irrigation filter and a pressure regulator that outputs between 14.5 and 58 PSI to properly activate the check valves.
Step 2: Layout & Trench
Lay the tubing on the surface or trench it below ground (typically 4-6 inches deep for turfgrass or garden beds). The Copper Oxide emitters will permanently prevent roots from intruding into the buried line.
Step 3: Attach 17mm Fittings
Use specialized 17mm barbed fittings to create corners, tees, or branch off from a solid PVC or poly mainline. Standard 1/2" fittings will not fit this tubing securely.
Step 4: Flush and Cap
Before capping the system, turn the water on to flush any dirt or debris out of the open lines. Once the water runs clear, terminate the ends using 17mm figure-eight line ends or end plugs.
What do "CV" and "XR" stand for?
CV stands for Check Valve, meaning the line stays pressurized when turned off to prevent low-point drainage. XR stands for Copper Oxide, a material embedded in the emitter to repel root growth.
Together, these technologies make it the absolute best choice for sloped, sub-surface irrigation.
Can this tubing be buried underground?
Yes! Netafim Techline CV XR is specifically engineered for sub-surface applications. The Copper Oxide permanently prevents roots from growing into the emitters, allowing you to water lawns and dense beds from beneath the soil.
Burying the line also completely eliminates evaporation, drastically reducing your overall water usage.
What fittings do I need for this tubing?
You must use standard 17mm barbed fittings. Standard 1/2" compression or Easy Loc fittings (which are sized for 0.700" OD tubing) are too large and will not create a watertight seal on this 17mm pipe.
Make sure all elbows, tees, and couplers are specifically rated for 17mm dripline.
How should I prepare my sub-surface Netafim system for spring planting?
As you prepare for spring watering, open the flush valves at the ends of your Netafim lines and run the system to thoroughly flush out any fine silt or sediment that accumulated over the winter.
Additionally, check and clean your 120-mesh irrigation filter at the head assembly to guarantee optimal flow and pressure as the growing season kicks off.
Please note the unique parameters for this tubing:
Ensure your sub-surface drip irrigation setup is protected and ready to run with these components:
Apr 30th 2026
Apr 29th 2026
Apr 28th 2026
Apr 27th 2026
