The Male Hose x 3/4" Male Pipe Adapter is a specialized transition fitting designed to turn any standard 3/4" Female Pipe Thread (FPT) outlet into a connection point for a garden hose. Whether you are building a custom manifold or attaching a hose-end timer to a rigid PVC line, this adapter bridges the gap between plumbing components and garden accessories.
Unlike glue-in adapters, this threaded fitting screws directly into tees, elbows, or valves, allowing for a removable and modular connection. It is one of our most practical irrigation fittings for nursery headers, greenhouse water supplies, and hydrant assemblies where a direct Male Hose Thread (MHT) outlet is required.
Ensure you match the correct thread types.
| Specification | Details |
|---|---|
| Product Type | Threaded Adapter (MPT x MHT) |
| Connection 1 (System Side) | 3/4" Male Pipe Thread (MPT) - Requires Tape |
| Connection 2 (Outlet Side) | 3/4" Male Hose Thread (MHT) - Uses Washer |
| Material | Schedule 40 PVC (White) |
| Max Temperature | 140° F |
| Manufacturer | DIG and Aqualine |
| MPN (Plastic) | D49 |
| MPN (Brass) | HPF8 |
Follow these steps for a secure, non-permanent connection.
Step 1: Tape the Pipe Threads
Apply Thread Seal Tape to the 3/4" MPT end of the adapter. Wrap 3-4 times in a clockwise direction. This is critical for sealing tapered pipe threads.
Step 2: Screw into Fitting
Thread the taped end into your 3/4" Female Pipe Thread (FPT) fitting (e.g., a PVC Tee or Elbow). Hand-tighten firmly, then use a wrench for one final turn. Do not over-tighten.
Step 3: Connect Hose
Screw your garden hose, timer, or Y-valve onto the exposed 3/4" Male Hose Thread (MHT) end. Ensure the female accessory you are attaching has a rubber washer inside.
Verify your threads:
Ensure a leak-free setup with these essentials:
Apr 16th 2026
Apr 15th 2026
Apr 14th 2026
Apr 13th 2026
