The Hydro-Rain 1" Blu-Lock Tee revolutionizes the way you install sprinkler systems. Designed for speed and durability, this "push-and-go" fitting allows you to split your 1" Blu-Lock Tubing in two directions without the mess of primer or glue. Whether you are installing a new lawn system or repairing an existing lateral line, Blu-Lock offers the fastest installation method on the market.
By eliminating the need for solvent welding, you can install these irrigation fittings in wet or dry conditions immediately—no cure time required. The stainless steel retaining ring grips the pipe tightly, while the high-quality seal ensures leak-proof performance under pressure.
Detailed specs for the Hydro-Rain Blu-Lock system.
| Specification | Details |
|---|---|
| Product Type | Tee (3-Way Connection) |
| Connection Size | 1" x 1" x 1" Blu-Lock |
| Compatibility | Only fits 1" Blu-Lock HDPE Tubing (SIDR 15/19) |
| Operating Pressure | 10 - 100 PSI (Non-Constant Pressure) |
| Burst Pressure | Exceeds 250 PSI |
| Material | ABS Body, Stainless Steel Grip Ring, EPDM Seal |
| MPN | BL-401-010 |
| Manufacturer | Hydro-Rain |
Installation is tool-free (except for cutting the pipe).
Step 1: Cut the Pipe
Using a pipe cutter, make a clean, square cut on your 1" Blu-Lock tubing. Avoid using hacksaws, as rough edges can damage the internal O-ring.
Step 2: Push to Connect
Insert the tubing into the Tee fitting. Push firmly until you feel it slide past the grip ring and hit the internal stop. No twisting is necessary.
Step 3: Verify Connection
Give the tubing a gentle tug to ensure the stainless steel teeth have engaged. The connection is now secure and ready for water.
Removal (If Needed)
To remove the fitting, press the Blu-Lock Release Tool against the collar of the fitting to disengage the teeth, then pull the tubing out.
Ensure you have the right tubing:
Everything you need for a fast Blu-Lock installation:
Jun 2nd 2026
Jun 1st 2026
May 29th 2026
May 28th 2026
