null

EZ-FLO Coarse High-Pressure Cap with Nuts and Dip Tubes for CX Models

Add to Cart
$51.95

Info

SKU:
IEZCAPTUBE
MPN:
CAP-KIT CX

Specifications

Configuration:
223

Description

OEM Replacement Cap Kit for EZ-FLO CX-Series Fertilizer Injectors

The EZ-FLO Coarse High-Pressure Cap with Nuts and Dip Tubes (CAP-KIT CX) is the genuine OEM replacement cap assembly for EZ-FLO CX-series fertilizer injectors. If the cap on your existing EZ-FLO fertilizer injector is cracked, leaking, or has a worn proportioning knob, this kit restores your unit to full working order without replacing the entire injector. Built from Schedule 80 PVC for durability in high-pressure mainline applications, it ships with two 16-inch universal dip tubes and the locking nuts required for installation. All other replacement parts — such as O-rings, flow discs, and tanks — are sold separately and available in the EZ-FLO Replacement Parts & Accessories section.

Key Features
  • Genuine OEM Replacement: Direct-fit cap assembly from EZ-FLO — no modifications required for compatible CX-series units.
  • Schedule 80 PVC Construction: Heavy-duty PVC rated for high-pressure mainline installation, providing long-term chemical and UV resistance.
  • Simple Turn Proportioning Knob: Easy-to-adjust knob controls the fertilizer feed rate without tools.
  • Universal Dip Tubes Included: Comes with two 16-inch universal dip tubes and the required locking nuts — everything needed to complete the cap replacement.
  • Improved Design: Updated cap design compatible with all EZ-FLO units from 2017 and newer, and also replaces several older legacy caps (see Compatibility below).
Technical Specifications

Specifications for this replacement cap assembly.

Specification Details
Part Number CAP-KIT CX (DripWorks SKU: IEZCAPTUBE)
Material Schedule 80 PVC
Thread Type Coarse Thread
Dip Tube Length 16 inches (Universal)
Dip Tubes Included Yes (2 included)
Nuts Included Yes
Pack Quantity 1 cap assembly per pack
Brand EZ-FLO
Compatibility Guide

This cap kit (CAP-KIT CX) is compatible with the following EZ-FLO injector models:

2017 and Newer Models:

  • IEZH34 (3/4 Gallon Hose Thread Unit)
  • IEZ1GUP (1 Gallon Hose Thread Unit)
  • IEZH2 (2 Gallon Hose Thread Unit)
  • IEZPR112C (1.75 Gallon High-Pressure Unit)
  • IEZPR3C (2.5 Gallon High-Pressure Unit)

Pre-2017 Models Also Supported:

  • EZ001-CX, EZ003-CX, EZ 2005-HB, EZ 2020-HB, EZ 1010-HB, EZKIT-1, EZKIT-3

This Cap Kit Replaces These Discontinued Parts:

  • IEZCAP (CAP-MPT) — previously used on IEZH34, IEZ1GUP, and IEZH2
  • IEZCAPHCRS (CAP-HPC) — previously used on IEZPR112C and IEZPR3C
Frequently Asked Questions

Will this cap work on my older EZ-FLO injector purchased before 2017?
Yes. Per EZ-FLO, this updated CAP-KIT CX is backward-compatible with pre-2017 CX-series models including EZ001-CX, EZ003-CX, EZ 2005-HB, EZ 2020-HB, EZ 1010-HB, EZKIT-1, and EZKIT-3.

It also serves as the direct replacement for two discontinued cap parts: IEZCAP (CAP-MPT) and IEZCAPHCRS (CAP-HPC).

What else is included in this kit besides the cap?
This kit includes the replacement cap, two 16-inch universal dip tubes, and the locking nuts needed for installation.

All other components — such as O-rings, flow disc kits, tanks, and quick connects — are sold separately in our EZ-FLO Replacement Parts & Accessories section.

Why is Schedule 80 PVC used for this cap?
Schedule 80 PVC has a thicker wall than standard Schedule 40, making it rated for higher-pressure mainline applications typical of EZ-FLO CX-series high-pressure injectors.

It also provides good resistance to the fertilizer solutions and soil amendments commonly used in fertigation systems.

Do I need to replace the dip tubes when replacing the cap?
Not always, but since this kit already includes two new universal 16-inch dip tubes, it is good practice to install the fresh ones while the injector is disassembled.

Inspect your existing dip tubes for cracks or brittleness. If you only need replacement dip tubes without the full cap, they are also available separately as EZ-FLO Dip Tube Sets.

✔ Important Notes

  • Cap & Dip Tubes Only: This kit does not include O-rings, flow discs, tanks, or other injector components. See our full EZ-FLO Replacement Parts selection if additional components are needed.
  • Coarse Thread: This cap uses coarse (standard) threads. Verify your injector model is a CX-series unit before ordering. It is not compatible with EZ-FLO fine-thread or NPT-threaded models.
  • Verify Compatibility: Cross-reference your injector's model number against the compatibility list in the tab above to confirm this cap is the correct fit.

Complete Your EZ-FLO System

Keep your fertigation setup running at peak performance with these related products:

Relevant Tips & Guides

Related Resources

Gardening

How to Start a No-Till Garden the Easy Way

May 21st 2026

No-till gardening is a gardening method in which you do not disturb the soil with machines, tillers, …
See More
Landscape

Everything You Need to Know About Sprinkler Nozzles

May 20th 2026

A healthy, thriving yard results from a smart irrigation system, and one of the most important parts …
See More
Landscape

Top 7 Ways to Enhance Your Home’s Curb Appeal This Spring with Exterior Lighting

May 19th 2026

Spring is the perfect season to refresh your home's exterior. As lawns turn lush green and daylight …
See More
Drip Irrigation

Drip Irrigation Checklist for Spring: Essential Steps for a Thriving Garden

May 18th 2026

With mid-May upon us and temperatures rising, now is the perfect time to prepare your garden for a t …
See More