The DIG 7X0A Series Battery Operated Controller is engineered for challenging landscape sites where traditional AC power is unavailable. Featuring a completely waterproof housing, this rugged controller can be installed safely above grade or hidden completely below ground inside a valve box. It is an ideal, commercial-grade solution for automating complex watering schedules across multiple zones.
Despite being battery-powered, the 7X0A Series does not compromise on functionality. It features an integrated large display with EasyFlow™ navigation, making it simple to manage up to four independent programs and five start times per day. The unit includes dedicated wire connections for a master valve, a rain sensor, and DC latching solenoids. With 20 preset smart programs utilizing historical Evapotranspiration (ET) data, it's never been easier to optimize your garden's hydration for peak summer performance.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Valve Compatibility | DC Latching Solenoids Only |
| Power Source | Two AA Alkaline Batteries (Not Included) |
| Controller Power Input | 11 Volts |
| Programming Display | Seven Keypad Buttons with Integrated LCD |
| Watering Duration | Up to 5 Hours and 59 Minutes (in 1-minute increments) |
| Sensor Connection | Normally Closed 6-Inch Yellow Wire (16 AWG) |
| Solenoid Control Orifice | .065 (1.65mm) |
| Operating Temperature | 38°F to 130°F (3°C to 54°C) |
| Warranty | 3 Years |
Proper installation is key for reliable below-grade operation.
Step 1: Install the Batteries
Remove the battery compartment cover and insert two fresh AA alkaline batteries. Ensure the compartment's waterproof seal is secure when replacing the cap.
Step 2: Wire the Solenoids and Sensors
Using waterproof wire connectors, splice the controller's station wires to your DC latching solenoids. If using a master valve or a normally closed rain sensor, connect them to the designated 16 AWG yellow wires.
Step 3: Program the Controller
Use the seven keypad buttons and EasyFlow™ navigation on the LCD screen to set your current AM/PM time, date, and preferred watering schedules or ET smart programs.
Step 4: Mount the Unit
Mount the controller securely to your valve manifold, a nearby post, or the side of your underground valve box using the appropriate mounting brackets.
Is the DIG 7X0A Series Controller completely waterproof?
Yes, the DIG 7X0A Series Controller is fully waterproof and designed for rugged above-grade or below-grade installation inside an underground valve box, eliminating the need for AC power.
This makes it the perfect solution for remote garden beds, commercial landscapes, or any location without access to an electrical outlet.
How do I adjust the DIG 7X0A Series Controller for peak summer heat?
You can use the monthly water budgeting feature or select one of the 20 preset smart programs that utilize historical Evapotranspiration (ET) to automatically adjust for hot summer weather.
These features ensure your plants receive extra hydration during heat waves while conserving water during cooler periods.
Will I lose my programs on the DIG 7X0A Series Controller if the batteries die?
No, the DIG 7X0A Series Controller features non-volatile memory that holds your customized watering schedules and programs indefinitely, even when the batteries are completely drained or removed.
You will only need to reset the current time and date when you install fresh AA alkaline batteries.
Can I connect a rain sensor to the DIG 7X0A Series Controller?
Yes, this controller includes dedicated wire connections for a normally closed rain sensor, allowing your system to automatically pause watering during heavy spring and summer rainstorms.
The controller also features a manual rain delay function that can suspend irrigation for up to 99 days.
Please note the requirements for this unit:
Ensure your multi-zone system is ready for action with these necessary components:
Mar 31st 2026
Mar 30th 2026
Mar 26th 2026
Mar 25th 2026
