The 3/4" Easy Loc x 3/4" Male Pipe Adapter is the robust solution for connecting high-capacity 3/4" Poly Tubing to threaded irrigation components. It allows for a seamless transition from rigid PVC manifolds, large filters, or valves directly to your drip mainline.
This fitting features a 3/4" Male Pipe Thread (MPT) on one side and a heavy-duty Easy Loc collar on the other. As one of our most robust irrigation fittings, this design ensures that you can handle the higher flow rates of 3/4" tubing without restricting water movement, all while maintaining a leak-proof seal without the need for glue or clamps on the poly side.
Understanding compatibility is key. This fitting adapts 3/4" Pipe Threads to 3/4" Tubing.
| Specification | Details |
|---|---|
| Product Type | 3/4" Easy Loc x 3/4" MPT Adapter |
| Connection 1 (Threaded) | 3/4" Male Pipe Thread (MPT) |
| Connection 2 (Tubing) | 3/4" Easy Loc (Fits .940" OD) |
| Tubing Compatibility | Standard 3/4" Poly Tubing (.940" OD) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| MPN | A1-H8TH75 |
| Common Brand Names | Irritec, Perma-Loc, Power Loc |
Follow these steps to ensure a leak-proof connection.
Step 1: Tape the Threads
Apply thread seal tape to the 3/4" Male Pipe Threads. Wrap clockwise 3-4 times. This is essential for preventing leaks on MPT fittings.
Step 2: Install Threaded End
Screw the adapter into your 3/4" Female Pipe Thread (FPT) component (such as a PVC tee or valve). Hand-tighten securely.
Step 3: Prep Tubing
Cut your 3/4" poly tubing squarely. Rotate the Easy Loc locking collar backwards to expose the barb.
Step 4: Lock it Down
Push the tubing firmly over the barb until it stops. Twist the locking collar forward (over the tubing) to clamp the connection.
Check your connection types:
Ensure your 3/4" system runs smoothly with these components:
Feb 19th 2026
Feb 18th 2026
Feb 17th 2026
Feb 16th 2026
