The 3/4" Compression Elbow is essential for navigating corners in high-capacity drip systems without kinking your line. Designed to join two pieces of 3/4" mainline tubing at a sharp 90-degree angle, this fitting allows you to route water precisely around garden beds, building foundations, or fence lines while keeping your installation neat and professional.
Engineered for heavy-duty applications, this elbow uses internal compression rings to grip the larger .940" OD tubing securely. It is one of our most reliable irrigation fittings for preventing flow restriction caused by bent tubing, ensuring your downstream plants receive the full volume of water they need.
Verify tubing dimensions before purchasing.
| Specification | Details |
|---|---|
| Product Type | 3/4" Compression Elbow (90°) |
| Connection 1 | 3/4" Compression (Fits .940" OD Tubing) |
| Connection 2 | 3/4" Compression (Fits .940" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS Plastic |
| Manufacturer | NDS |
| MPN | CEL 900 |
Installation requires force but no tools.
Step 1: Prep the Tubing
Cut your 3/4" poly tubing squarely at the point where you need the turn.
Important Tip: 3/4" tubing is thick and stiff. Allow the ends to warm in the sun or dip them in hot water for 10-20 seconds to soften the plastic before installing.
Step 2: Insert First Side
Push the tubing into one end of the elbow. Rock the tubing back and forth while pushing firmly until it passes the internal resistance ring (approx. 3/4" deep).
Step 3: Connect Second Side
Repeat the process for the second piece of tubing to complete the corner.
Ensure this elbow fits your system:
Everything you need for a high-flow installation:
May 14th 2026
May 13th 2026
May 12th 2026
May 11th 2026
