The 1/2" Easy Loc x 1/2" Male Pipe Adapter provides a direct, leak-proof connection between your water source and your drip irrigation mainline. Designed to thread effortlessly into standard PVC fittings, risers, or pressure regulators, this adapter allows you to transition to 1/2" polyethylene tubing in seconds.
As one of the most essential irrigation fittings for system start-ups, this adapter features a 1/2" Male Pipe Thread (MPT) on one side and the reliable Easy Loc locking collar on the other. This combination ensures a durable connection that can be hand-tightened without the need for glue, clamps, or specialized tools, making it perfect for both new installations and system repairs.
Key details for system compatibility.
| Specification | Details |
|---|---|
| Product Type | 1/2" Easy Loc x 1/2" MPT Adapter |
| Connection 1 (Threaded) | 1/2" Male Pipe Thread (MPT) |
| Connection 2 (Tubing) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| Material | Polypropylene with UV Stabilizers |
| MPN | A1-H6TH50 |
| Common Brand Names | Irritec, Perma-Loc, Power Loc |
Follow these steps for a watertight connection.
Step 1: Tape the Threads
Apply thread seal tape to the 1/2" male threads. Wrap clockwise 3-4 times. This is required for MPT fittings to seal against PVC or regulators.
Step 2: Install Threaded End
Screw the adapter into your 1/2" Female Pipe Thread (FPT) component (such as a PVC tee, riser, or regulator). Hand-tighten securely.
Step 3: Prep Tubing
Cut your 1/2" poly tubing squarely. Rotate the Easy Loc locking collar backwards (towards the threaded end) to expose the barb.
Step 4: Lock it Down
Push the tubing firmly over the barb until it hits the stop. Twist the locking collar forward over the tubing to clamp the connection.
Check your connection types:
Ensure your installation is successful with these essential items:
May 29th 2026
May 28th 2026
May 27th 2026
May 26th 2026
