The 1/2" Easy Loc x 3/4" Female Hose Swivel Elbow is the ideal fitting for connecting your drip system directly to a faucet, hose bibb, or hose-end timer. The 90-degree angle prevents kinking by allowing the tubing to run straight down from the spigot along a wall or foundation, keeping your head assembly neat and organized.
As one of our most essential irrigation fittings for starter kits and patio gardens, this elbow features a swivel female hose thread. This allows you to tighten the fitting onto a faucet without twisting the entire line of tubing. Like all Easy Loc components, it is reusable and requires no glue or clamps.
Verified specifications for system planning.
| Specification | Details |
|---|---|
| Product Type | Swivel Elbow Adapter |
| Connection 1 (Inlet) | 3/4" Female Hose Thread (FHT) Swivel |
| Connection 2 (Outlet) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| Material | Chemical & UV Resistant Polypropylene |
| MPN | A1-HE6S |
| Common Brand Names | Irritec, Perma-Loc |
Start your head assembly correctly.
Step 1: Connect to Water Source
Screw the swivel female hose end onto your faucet, timer, or pressure regulator. Hand-tighten until snug. Ensure the washer is seated inside.
Step 2: Prepare Tubing
Cut your 1/2" mainline tubing square. Loosen the Easy Loc nut on the elbow by turning it backwards to expose the barb.
Step 3: Insert Tubing
Push the tubing onto the barb until it hits the stop. It will fit snugly.
Step 4: Lock it Down
Twist the Easy Loc nut forward over the tubing to lock it in place.
Verify your thread and tubing types:
Build a professional head assembly with these recommended parts:
Jul 9th 2026
Jul 8th 2026
Jul 7th 2026
Jul 6th 2026
