Connecting a long run of drip tape to a faucet or hose timer can be frustrating if you have to twist the entire line to get it tight. The Tape Loc x Female Hose Swivel Adapter solves this problem with a free-spinning collar.
This adapter creates a direct link between your standard 3/4" Male Hose Thread (MHT) water source (like a spigot, garden hose, or filter) and your 5/8" drip tape. The swivel action ensures a tight seal without twisting or kinking your delicate tape line.
| Specification | Details |
|---|---|
| Product Type | Tape Loc x Female Hose Swivel |
| Connection 1 | 5/8" Drip Tape (Locking Nut) |
| Connection 2 | 3/4" Female Hose Thread (FHT) Swivel |
| Tape Wall Thickness | Fits 6 mil to 15 mil tape |
| Operating Pressure | 0 - 15 PSI (Do not exceed tape rating) |
| Material | Polypropylene with Carbon Black/UV Stabilizers |
| Common Brand Names | Irritec, Perma-Loc, Twist-N-Lok |
Step 1: Preparation (Swivel Side)
Ensure the rubber washer is seated inside the female swivel. Screw the swivel onto your water source. Hand-tighten only. Do not use thread sealant tape on the swivel connection.
Step 2: Prepare Tape
Cut your drip tape squarely. Critical Tip: Remove any hard plastic emitters in the first inch.
Step 3: Unlock
Rotate the locking nut counter-clockwise to expose the barb.
Step 4: Insert & Lock
Slide the drip tape over the barb until it hits the stop. Twist the locking nut clockwise to lock the tape.
This fitting is for 5/8" Drip Tape ONLY.
Dec 20th 2025
Dec 19th 2025
Dec 19th 2025
Dec 18th 2025
