The Rain Bird R-VAN24-360 is the largest-radius nozzle in Rain Bird's high-efficiency R-VAN rotary nozzle line — and it's purpose-built for full-circle coverage of wide-open turf areas. It delivers multiple rotating streams across a 17- to 24-foot radius in a fixed 360° full-circle pattern, making it the right choice for round or square lawn zones where complete coverage is needed from a single head location. Whether you're upgrading an existing spray zone or designing a new system for a large residential lawn, park strip, or commercial landscape, the R-VAN24-360 combines serious reach with water-saving technology that standard spray nozzles simply can't match.
What separates the R-VAN series from conventional fixed-spray nozzles is the rotating stream technology at its core. Instead of spraying a continuous fan of water, multiple slow-moving streams distribute water uniformly across the entire radius range at a much lower precipitation rate — significantly reducing runoff and erosion, and giving water time to soak in rather than sheet off. Rain Bird reports that retrofitting standard spray nozzles with R-VAN rotary nozzles can reduce flow by up to 60% and improve water efficiency by up to 30%. The thick, wind-resistant water streams resist misting and fogging even in adverse conditions, keeping water in the target zone rather than drifting off-course. A matched precipitation rate across all R-VAN models (R-VAN14, R-VAN18, R-VAN24) means you can mix nozzle sizes in the same zone without creating dry or over-watered spots.
The radius is easily adjusted by hand — no tools required — and Rain Bird recommends making adjustments while the system is running for best accuracy. The nozzle also features an exclusive pull-up flush feature: simply pull up on the nozzle body to clear dirt and debris from the nozzle orifice in the field, without removing or replacing the nozzle. This is particularly useful in sandy or dusty environments where clogging is a concern.
The R-VAN24-360 is color-coded and laser-marked for fast visual identification in the field, and it installs directly into any Rain Bird 1804, 1806, or 1812 spray body, as well as standard 1/2" risers and adapters. Note: This nozzle is NOT compatible with the Rain Bird 1802 or 1803 spray bodies. If you need adjustable arc coverage from the same R-VAN24 platform, see the R-VAN24 Adjustable Arc (45°–270°). For shorter-range zones, the R-VAN18-360 (13–18 ft) and R-VAN14-360 (8–14 ft) offer matched precipitation rates for mixed-zone designs.
| Specification | Details |
|---|---|
| DripWorks SKU | PRBVAN24 |
| Manufacturer Part No. | RVAN-24-360 |
| Brand | Rain Bird |
| Nozzle Type | High-Efficiency Rotary Nozzle |
| Pattern / Arc | Full Circle – 360° (Fixed, not adjustable) |
| Radius / Spacing | 17 ft to 24 ft (adjustable without tools) |
| Flow Rate (Full Circle) | 2.35 to 3.74 GPM |
| Pressure Range | 30 to 55 PSI |
| Recommended Operating Pressure | 45 PSI |
| Matched Precipitation Rate | Yes – across radius, arc, and pattern types within R-VAN series |
| Radius Adjustment | Tool-free; adjust while water is running |
| Flush Feature | Pull-up flush clears dirt and debris from nozzle orifice |
| Identification | Color-coded and laser-marked for easy R-VAN model ID |
| Compatible Spray Bodies | Rain Bird 1804, 1806, 1812 spray bodies; 1/2" risers and adapters |
| Incompatible Spray Bodies | NOT compatible with Rain Bird 1802 or 1803 spray bodies |
| Efficiency vs. Standard Spray | Reduces flow up to 60%; improves water efficiency up to 30% |
What makes the R-VAN24-360 more water-efficient than a standard spray nozzle?
Standard fixed-spray nozzles deliver water in a continuous fan pattern at a high precipitation rate, which often causes runoff before the water can soak in — especially on slopes or clay soils. The R-VAN24-360 uses rotating stream technology to apply water slowly across the full radius zone, giving it time to penetrate the soil. Rain Bird's data shows flow can be reduced by up to 60% and efficiency improved by up to 30% compared to standard spray nozzles operating at the same radius.
Is the 360° arc on this nozzle adjustable?
No. The R-VAN24-360 is a fixed full-circle (360°) nozzle — the arc cannot be changed. If you need an adjustable arc (45° to 270°) for corners, edges, or irregular shapes, use the R-VAN24 Adjustable Arc nozzle instead.
How do I adjust the radius on this nozzle?
Radius is adjusted by hand with no tools required. Rain Bird recommends making the radius adjustment while the system is running so you can visually verify coverage in real time. The nozzle can be set anywhere within the 17- to 24-foot spacing range.
What spray bodies is the R-VAN24-360 compatible with?
This nozzle is compatible with Rain Bird 1804, 1806, and 1812 spray bodies, as well as standard 1/2" risers and adapters. It is not compatible with the Rain Bird 1802 or 1803 spray bodies. DripWorks carries a full selection of compatible spray bodies if you need to upgrade your existing heads.
Can I mix R-VAN24-360 nozzles with R-VAN18 or R-VAN14 nozzles in the same zone?
Yes — this is one of the key advantages of the R-VAN series. All R-VAN nozzles share matched precipitation rates across radius and arc variations, so mixing nozzle sizes in the same irrigation zone will not create dry spots or over-watered areas, as long as each nozzle is set to its appropriate spacing.
What pressure is recommended for best performance?
Rain Bird recommends an operating pressure of 45 PSI for optimal performance. The nozzle will operate within a range of 30 to 55 PSI. If your system pressure exceeds 55 PSI, consider installing a pressure regulator to keep flow within the rated range and prevent misting.
What is the pull-up flush feature and when should I use it?
The pull-up flush feature allows you to clear the nozzle orifice of dirt and debris without removing or replacing the nozzle. Simply pull up on the nozzle body while the water is running and the flush action clears any blockage. This is especially useful in newly installed systems or in sandy, dusty conditions where debris can accumulate at the nozzle inlet.
Is this nozzle eligible for water district rebates?
The Rain Bird R-VAN series is a high-efficiency product that may be eligible for rebates from local water districts as part of turf conversion or irrigation upgrade programs. Check with your local water utility for current rebate programs in your area.
Before you install, verify the following:
| Model | Radius | Arc Options | GPM Range | Best For |
|---|---|---|---|---|
| R-VAN14-360 | 8–14 ft | 360° Fixed | 1.10–1.45 GPM | Small round turf areas |
| R-VAN18-360 | 13–18 ft | 360° Fixed | 1.65–2.11 GPM | Medium round turf areas |
| R-VAN24-360 (This Product) | 17–24 ft | 360° Fixed | 2.35–3.74 GPM | Large round turf areas |
| R-VAN24 Adj. Arc | 17–24 ft | 45°–270° Adj. | 0.60–2.88 GPM | Corners, edges, irregular shapes |
All R-VAN models share matched precipitation rates and are compatible for mixed-zone installations. Pressure range: 30–55 PSI across all models.
Pair your R-VAN24-360 nozzles with these components for a complete, high-efficiency irrigation setup:
Mar 18th 2026
Mar 17th 2026
Mar 16th 2026
Mar 12th 2026
