The PVC-Lock Slide Repair Coupler revolutionizes the way you fix broken sprinkler lines. Designed with a unique "slide" mechanism, this fitting features an extended length that can be compressed to fit into a cutout section of pipe, then expanded to bridge the gap. It allows you to repair a burst Schedule 40 or Class 200 PVC pipe without digging a massive trench or waiting for PVC glue to cure.
These advanced irrigation fittings utilize stainless steel retainer teeth and O-ring seals to create an instant, permanent connection. Because no primers or solvents are needed, you can pressurize the system immediately after installation—perfect for emergency repairs or wet conditions where traditional glue would fail.
Fast, glue-free specifications.
| Specification | Details |
|---|---|
| Product Type | Slide Repair Coupling (Push-Fit) |
| Compatibility | Schedule 40 & Class 200 PVC Pipe |
| Max Pressure | 150 PSI (Mainline Rated) |
| Material | UV Resistant ABS Body / Stainless Steel Teeth / EPDM Seal |
| Manufacturer | Hydro-Rain / Orbit |
| MPN (3/4") | 7884 |
| MPN (1") | 8646 |
Repair a break in under a minute.
Step 1: Cut and Clean
Remove the damaged section of pipe (approx 2-4 inches depending on coupler size). Ensure the remaining pipe ends are clean, square, and free of burrs using a PVC cutter.
Step 2: Slide On
Push one end of the repair coupler onto one side of the existing pipe. Because of the slide action, you can push it far enough onto the pipe to clear the gap.
Step 3: Slide Back
Align the other end of the coupler with the second pipe end. Slide the coupler back over the gap until it fully engages the second pipe.
Step 4: Pressurize
Once the fitting is centered and locked, you can turn the water back on immediately. No cure time needed!
Ensure your pipe is compatible:
Everything you need for a glueless repair:
Apr 30th 2026
Apr 29th 2026
Apr 28th 2026
Apr 27th 2026
