The PVC Compression Repair Coupling is a time-tested solution for fixing leaks in irrigation mainlines and laterals. Unlike glue-on fittings that require dry pipe and cure time, this mechanical coupling uses heavy-duty rubber gaskets and threaded nuts to create a water-tight seal instantly. It works effectively on wet pipe, making it the go-to choice for emergency repairs on Schedule 40 PVC pipe.
These robust irrigation fittings are designed with a slightly larger body that slides over the existing pipe. By tightening the nuts on either end, you compress the internal gaskets against the pipe wall, stopping the leak immediately. This design is perfect for situations where water flow cannot be completely shut off or where the pipe cannot be dried sufficiently for solvent welding.
Specs for the Flo-Control series.
| Specification | Details |
|---|---|
| Product Type | Compression Repair Coupling |
| Connection Method | Compression Gasket (Threaded Nuts) |
| Max Pressure | 150 PSI @ 73°F (Static Pressure) |
| Material | PVC Body / EPDM or Buna-N Gaskets |
| Manufacturer | DURA |
| MPN (1/2") | CPC-0500 |
| MPN (3/4") | CPC-0750 |
| MPN (1") | CPC-1000 |
| MPN (1 1/2") | CPC-1500 |
| MPN (2") | CPC-2000 |
Secure a leak-free seal in four steps.
Step 1: Prep the Pipe
Cut out the damaged section of pipe. Clean the pipe ends thoroughly with sand cloth to remove dirt, mud, or old glue. Crucial: The gasket needs a smooth surface to seal against.
Step 2: Disassemble & Slide
Unscrew the nuts and remove the rubber gaskets from the coupling body. Slide a nut and then a gasket onto each side of the pipe.
Step 3: Position the Body
Place the white PVC body into the gap. Slide the gaskets and nuts toward the body.
Step 4: Tighten
Screw the nuts onto the body. Hand tighten firmly, then use a wrench for an additional half-turn if necessary. Do not overtighten.
Know the limits:
Ensure a successful repair with these tools:
Feb 4th 2026
Feb 3rd 2026
Feb 2nd 2026
Jan 29th 2026
