The Netafim Techline CV XR 17mm Emitter Tubing (12" Spacing, 0.61 GPH) is the industry's premier choice for long-lasting sub-surface and on-surface drip irrigation. Featuring Netafim's proprietary XR technology, each internal emitter is enhanced with Copper Oxide to provide incredible, chemical-free protection against destructive root intrusion. Combined with a heavy-duty built-in Check Valve (CV), all emitters turn on and shut off at the exact same time, preventing low-point drainage and ensuring 100% uniformity across your entire zone. It is the ultimate solution for heavily sloped terrains, turfgrass, and complex commercial landscapes.
Engineered for unmatched durability, this 17mm tubing utilizes pressure-compensating (PC) and continuous self-flushing emitters that are highly resistant to clogging from poor-quality water. With a precise 0.61 GPH output spaced every 12 inches, you can confidently run highly efficient lateral lengths up to an impressive 393 feet, guaranteeing that the last plant on the run receives the exact same hydration as the first. When paired with standard 17mm barbed fittings and a 120-mesh irrigation filter, this dripline delivers flawless, maintenance-free watering for years to come.
Detailed specifications for system planning.
| Specification | Details |
|---|---|
| Tubing Size | 17mm Diameter |
| Emitter Spacing | Every 12 Inches (30.5 cm) |
| Emitter Flow Rate | 0.61 Gallons Per Hour (GPH) per Emitter |
| Total Flow Rate | 60.8 GPH per 100-foot length |
| Operating Pressure Range | 14.5 to 58 PSI |
| Check Valve Operation | Opens at 14.5 PSI | Shuts off at 2 PSI |
| Maximum Run Length | 393 Feet (at an inlet pressure of 60 PSI) |
| Root Intrusion Defense | Embedded Copper Oxide (XR) + Physical Barrier |
| Required Filtration | 120 Mesh Minimum |
| Brand | Netafim |
Install your 17mm Netafim Techline correctly for optimal performance.
Step 1: Connect to Source
Connect the tubing to your water source. Ensure your head assembly includes a 120-mesh irrigation filter and a pressure regulator that outputs between 14.5 and 58 PSI to activate the check valves.
Step 2: Layout & Trench
Lay the tubing on the surface or trench it below ground (typically 4-6 inches deep for turfgrass or garden beds). The Copper Oxide emitters will permanently prevent roots from intruding into the buried line.
Step 3: Attach 17mm Fittings
Use specialized 17mm barbed fittings to create corners, tees, or branch off from a solid PVC or poly mainline. Standard 1/2" fittings will not fit this tubing securely.
Step 4: Flush and Cap
Before capping the system, turn the water on to flush any dirt or debris out of the open lines. Once the water runs clear, terminate the ends using 17mm figure-eight line ends or end plugs.
What do "CV" and "XR" stand for?
CV stands for Check Valve, meaning the line stays pressurized when turned off to prevent low-point drainage. XR stands for Copper Oxide, a material embedded in the emitter to repel root growth.
Together, these technologies make it the absolute best choice for sloped, sub-surface irrigation.
Can this tubing be buried underground?
Yes! Netafim Techline CV XR is specifically engineered for sub-surface applications. The Copper Oxide permanently prevents roots from growing into the emitters, allowing you to water lawns and dense beds from beneath the soil.
Burying the line also completely eliminates evaporation, drastically reducing your overall water usage.
What fittings do I need for this tubing?
You must use standard 17mm barbed fittings. Standard 1/2" compression or Easy Loc fittings (which are sized for 0.700" OD tubing) are too large and will not create a watertight seal.
Make sure all elbows, tees, and couplers are specifically rated for 17mm dripline.
How should I prepare my sub-surface Netafim system for spring planting?
As you prepare for spring watering, open the flush valves at the ends of your Netafim lines and run the system to thoroughly flush out any fine silt or sediment that accumulated over the winter.
Additionally, check and clean your 120-mesh irrigation filter at the head assembly to guarantee optimal flow and pressure as the growing season kicks off.
Please note the unique parameters for this tubing:
Ensure your sub-surface drip irrigation setup is protected and ready to run with these components:
Apr 16th 2026
Apr 15th 2026
Apr 14th 2026
Apr 13th 2026
