Landscape
How to Install a French Drain: DIY Guide
Oct 16th 2026
A beautiful lawn and garden can become a frustrating mess when water has nowhere to go. A properly i
…
See More
Keep your MixRite TF5 2% Injector (IMRTF52) running at peak performance with this genuine OEM replacement seal kit (MPN: 35200000002) from DEMA Engineering. Over time, the internal seals on a MixRite injector wear with normal use — this kit contains all three seals needed for a complete service: the upper piston seal, the lower piston seal, and the suction seal.
Replace the piston seals when the injector begins to stutter or fails to operate at low flow rates. Replace the suction seal when the unit stops drawing fertilizer or does so irregularly. Keeping a spare kit on hand ensures fast, minimal-downtime maintenance for your fertigation system. This kit is compatible only with the TF5 2% model — please verify your injector model before ordering. Also available: seal kits and piston kits for other MixRite models.
| Detail | Information |
|---|---|
| Compatible Injector Model | MixRite TF5 2% (IMRTF52 / TF5-002) |
| Kit Contents | Upper Piston Seal, Lower Piston Seal, Suction Seal |
| Manufacturer Part Number | 35200000002 |
| Brand | DEMA / MixRite |
| SKU | IMRTF5SLKIT |
When should I replace the piston seals?
Replace the piston seals when your MixRite injector starts to stutter or no longer operates reliably at low flow rates where it previously functioned normally.
When should I replace the suction seal?
Replace the suction seal when the injector stops drawing fertilizer from the supply tank, or begins to do so erratically and inconsistently.
Will this seal kit fit other MixRite models?
No. This kit is designed exclusively for the TF5 2% injector (IMRTF52). DripWorks carries separate seal kits and piston kits for other MixRite models — always verify your model number before ordering.
This seal kit is compatible only with the MixRite TF5 2% injector (IMRTF52 / TF5-002). It will not fit the TF5 4%, TF5 1%, TF10, TF25, or any 500-series MixRite models. If you are unsure of your model, check the label on your injector or reference the full MixRite replacement parts page for all available kits.
Oct 16th 2026
Oct 15th 2026
Oct 13th 2026
Oct 12th 2026