The 1" Manifold x 3/4" Barb Adapter is the essential link between your high-capacity manifold system and your primary irrigation lines. Specifically designed to adapt a 1" female swivel port to 3/4" polyethylene tubing, this fitting ensures a seamless transition with minimal flow restriction.
Molded from professional-grade PVC by Dura Plastics, this adapter is built for the rigors of agricultural and commercial landscaping. Its 1" Male Pipe Thread (MPT) is optimized for use with Dura manifold components, allowing for a hand-tightened seal that eliminates the need for messy glues or solvents when building your valve headers.
Key data for precise system engineering.
| Specification | Details |
|---|---|
| Product Type | Manifold to Barb Adapter |
| Inlet Connection | 1" Male Pipe Thread (MPT) |
| Outlet Connection | 3/4" Insert Barb |
| Material | UV-Stabilized Schedule 40 PVC |
| Tubing Compatibility | Fits 3/4" Poly Tubing (.820" ID x .940" OD) |
| Operating Pressure | Up to 125 PSI |
| Manufacturer Part Number (MPN) | 301-007 |
Follow these steps for a professional-grade installation.
Step 1: Check Your Fitting
Identify if you are connecting to a Swivel manifold fitting or a Fixed PVC fitting. If using a Dura Swivel Tee, do not use thread tape. If using a fixed PVC Tee, apply 3-5 wraps of thread seal tape to the adapter threads.
Step 2: Screw Into Manifold
Thread the 1" MPT end into your manifold port. Hand-tighten until snug. If using a swivel fitting, tighten the grey nut until it stops—do not use a wrench, as it can crush the O-ring.
Step 3: Connect the Tubing
Push your 3/4" poly tubing over the barb. For easier installation in cold weather, dip the end of the tubing in warm water for 10 seconds to soften it.
Step 4: Secure with Clamps
Slide a stainless hose clamp over the tubing and barb. Use a nut driver or screwdriver to tighten the clamp for a secure, high-pressure seal.
Ensure the right fit for your project:
Get everything you need for a robust manifold setup:
Apr 23rd 2026
Apr 22nd 2026
Apr 21st 2026
Apr 20th 2026
