The Male Hose x 3/4" PVC Elbow is a versatile adapter designed to transition your rigid Schedule 40 PVC pipe directly into a standard garden hose connection. By gluing the slip end onto your pipe, you essentially create a permanent, 90-degree "faucet" or connection point anywhere in your system. This is perfect for installing a Hose Y with Valve, a hose-end timer, or simply attaching a garden hose to a remote irrigation line.
Unlike standard plumbing parts found at big-box stores, this specialty fitting combines a 3/4" Slip socket with 3/4" Male Hose Threads (MHT) in a single, compact unit. It is one of our most problem-solving irrigation fittings for greenhouse manifolds, hose bib assemblies, and custom watering stations where you need to turn a corner and adapt to hose threads simultaneously.
Key dimensions for system integration.
| Specification | Details |
|---|---|
| Product Type | PVC Elbow Adapter |
| Connection 1 (PVC) | 3/4" Slip / Socket (Requires Glue) |
| Connection 2 (Hose) | 3/4" Male Hose Thread (MHT) |
| Material | Schedule 40 PVC (Black) |
| Angle | 90 Degrees |
| MPN | A5-EP3/4HT |
| Common Brand Names | Irritec |
This fitting requires a permanent solvent weld on one side.
Step 1: Prepare the Pipe
Cut your 3/4" PVC pipe square and remove any burrs. Clean the pipe and the inside of the fitting's slip socket with primer.
Step 2: Glue the Connection
Apply PVC Glue to the outside of the pipe and the inside of the fitting socket. Push the fitting onto the pipe, twisting a quarter turn, and hold for 30 seconds to set.
Step 3: Attach Hose Accessory
Once the glue has cured, you can screw a garden hose, timer, or cap onto the threaded male end. Ensure a hose washer is present in the female accessory you are attaching to prevent leaks.
Verify your connection types:
Ensure a leak-free installation with these essentials:
May 19th 2026
May 18th 2026
May 14th 2026
May 13th 2026
