Landscape
How to Install a French Drain: DIY Guide
Oct 16th 2026
A beautiful lawn and garden can become a frustrating mess when water has nowhere to go. A properly i
…
See More
The Male Hose x 1" Female Pipe Adapter is a specialized fitting designed to transition larger, professional-grade components onto a standard garden hose system. It features a standard 3/4" Male Hose Thread (MHT) on one side and a large 1" Female Pipe Thread (FPT) on the other. This configuration is most commonly used to attach a high-capacity 1" Filter or pressure regulator directly to a hose bib assembly or garden hose.
By stepping up from the standard 3/4" hose connection to a 1" pipe thread, this adapter opens up a wider range of irrigation fittings and heavy-duty equipment for use in residential or semi-commercial setups. It eliminates the need for complex bushing assemblies, providing a clean, single-piece solution.
Key sizing details for compatibility.
| Specification | Details |
|---|---|
| Product Type | Threaded Adapter (Hose to Pipe) |
| Connection 1 (Hose) | 3/4" Male Hose Thread (MHT) |
| Connection 2 (Pipe) | 1" Female Pipe Thread (FPT) |
| Material | Plastic (Polypropylene/PVC) |
| MPN | C5-HTFPT10 |
| Common Brand Names | Irritec |
Secure two different thread types in minutes.
Step 1: Prepare the 1" Component
Take your 1" Male Pipe Thread (MPT) device (e.g., filter or regulator). Wrap the threads with thread seal tape (3-4 wraps) to ensure a watertight seal.
Step 2: Connect the Adapter
Screw the 1" FPT side of this adapter onto the taped 1" component. Hand-tighten firmly.
Step 3: Connect to Hose System
The other side is now a 3/4" Male Hose Thread. You can screw a garden hose, a timer, or a female hose cap onto this end. Ensure the female device you attach has a hose washer seated inside.
Verify your sizes:
Ensure a leak-free setup with these essentials:
Oct 16th 2026
Oct 15th 2026
Oct 13th 2026
Oct 12th 2026