The 3/4" Hose Shutoff puts water control right in the palm of your hand. Whether you are swapping between different hose nozzles or need to stop water flow at the end of a long garden hose run, this valve eliminates the need to walk back and forth to the spigot. As one of our most practical irrigation fittings, it is an essential tool for hand watering, greenhouse management, and temporary drip setups.
Designed with a large, ergonomic lever, this valve allows for smooth quarter-turn operation even with wet or muddy hands. The swivel inlet makes attachment easy, ensuring you can thread it onto any standard garden hose or faucet without kinking your line.
Key details for system integration.
| Specification | Details |
|---|---|
| Product Type | Inline Ball Valve (Shutoff) |
| Inlet Connection | 3/4" Female Hose Thread (FHT) Swivel |
| Outlet Connection | 3/4" Male Hose Thread (MHT) |
| Material | High-Impact Plastic or Brass |
| Flow Control | Quarter-Turn Lever (Off to Full On) |
| MPN | A2-VHT75 (Plastic) / 58270N (Brass) |
| Manufacturer | Irritec (Plastic) / Orbit (Brass) |
Add control to your hose in seconds.
Step 1: Check the Washer
Ensure a hose washer is properly seated inside the swivel inlet. If missing, the connection will leak.
Step 2: Attach to Hose
Screw the female swivel end onto your garden hose or faucet. Hand-tighten until snug. Do not use pliers, especially on plastic models, as this may crack the body.
Step 3: Connect Accessory
Attach your watering wand, sprinkler, or nozzle to the male threaded outlet.
Step 4: Operate
Flip the lever parallel to the valve body for "ON" and perpendicular for "OFF".
Ensure this valve fits your equipment:
Upgrade your watering setup with these recommended add-ons:
May 13th 2026
May 12th 2026
May 11th 2026
May 7th 2026
