The 3/4" Plastic Hose Cap is an essential accessory for any gardener or irrigation professional. Designed with standard 3/4" Female Hose Threads (FHT), this durable cap creates a water-tight seal on any outdoor faucet, spigot, or water timer outlet. Whether you are closing off one side of a hose Y-splitter or winterizing your system to keep debris out, this cap provides a reliable solution.
As one of the most fundamental irrigation fittings in our inventory, the Hose Cap comes complete with a hose washer to ensure a drip-free connection. It is constructed from high-impact plastic, making it resistant to rust and corrosion typically seen with metal caps.
Simple specs for a reliable seal.
| Specification | Details |
|---|---|
| Product Type | Threaded End Cap |
| Thread Size | 3/4" Female Hose Thread (FHT) |
| Material | High-Impact Plastic (ABS/Poly) |
| Includes | 1 Rubber Hose Washer |
| Compatibility | Standard Garden Hose Threads (GHT/NH) |
| MPN | N/A |
Achieve a water-tight seal in seconds.
Step 1: Check the Washer
Ensure the included rubber washer is seated flat at the bottom of the cap. If it is missing or damaged, the cap will leak.
Step 2: Align Threads
Place the cap over the 3/4" Male Hose Thread outlet (e.g., your faucet or hose Y). Ensure it is not cross-threaded.
Step 3: Tighten
Twist the cap clockwise until it is snug against the outlet. Hand-tighten only. Using pliers may crack the plastic or damage the threads.
Will this fit your setup?
Maximize the utility of your faucet assembly with these add-ons:
May 14th 2026
May 13th 2026
May 12th 2026
May 11th 2026
