The Schedule 40 PVC Bushing (Spigot x FPT) is a versatile space-saver designed to reduce the size of a fitting outlet while providing a threaded connection. This bushing inserts flush into the socket of a standard PVC fitting (like a Tee or Elbow) and creates a smaller Female Pipe Thread (FPT) outlet. It is one of the most practical irrigation fittings for adding risers, gauges, or smaller threaded components directly to a larger Schedule 40 PVC manifold.
By eliminating the need for extra pipe nipples or couplers, this "flush style" bushing keeps your system low-profile and professional. It is ideal for adapting a 1" mainline tee down to accept a 1/2" sprinkler riser or transitioning from a pump outlet to a different pipe size.
Verified specifications for system planning.
| Specification | Details |
|---|---|
| Product Type | Reducer Bushing (Flush Style) |
| Connection 1 (Large End) | Spigot (Fits INSIDE a standard Slip socket) |
| Connection 2 (Small End) | Female Pipe Thread (FPT) |
| Material | Schedule 40 PVC (White) |
| Standards | ASTM D-2466, NSF Certified |
| MPNs (Common Sizes) |
438-101 (3/4" x 1/2") 438-130 (1" x 1/2") 438-131 (1" x 3/4") |
Proper installation requires solvent welding the spigot side and threading the FPT side.
Step 1: Solvent Weld the Spigot
Clean and prime the outside of the bushing (spigot end) and the inside of the mating fitting socket. Apply PVC Glue to both surfaces. Insert the bushing fully into the socket with a quarter turn and hold for 30 seconds.
Step 2: Prepare the Threaded Connection
Wrap the threads of your male accessory (e.g., riser or nipple) with thread seal tape.
Step 3: Install the Threaded Item
Screw the male threaded item into the FPT outlet of the bushing. Hand tighten firmly.
Step 4: Allow Cure Time
Wait for the solvent cement to fully cure (check glue label for times) before pressurizing the system.
Ensure you have the right connections:
Get everything you need for a secure installation:
Oct 29th 2026
Oct 28th 2026
Oct 27th 2026
Oct 26th 2026
