Barbed Reducing Tee

Description
Info

Info

SKU:: Q_BRT
UPC:

Description

Split and Reduce in One Efficient Step.

The Barbed Reducing Tee is a specialized insert fitting designed to split a main irrigation line while simultaneously reducing the tubing size for the new branch. Whether you are running a 3/4" header and want to feed a 1/2" garden bed, or stepping down from a 1" agricultural line, this fitting eliminates the need for multiple couplers and bushings. It allows you to create efficient, streamlined layouts using standard irrigation fittings and Polyethylene tubing.

Constructed from durable Schedule 40 PVC, these tees feature aggressive multi-ridged barbs on all three connection points (Run x Run x Branch). This ensures a secure, high-pressure grip that resists pull-out. Because these are insert fittings, they must be secured with stainless steel Hose Clamps to guarantee a leak-proof seal under constant water pressure.

Why Choose Dura Reducing Tees?

Simplified Layouts: Combines the function of a tee and a reducer into a single component, saving money and reducing potential leak points.
High-Flow Capability: The unrestricted internal bore allows for maximum flow to pass through to your downstream zones without significant pressure loss.
Rugged Durability: Molded from high-impact Schedule 40 PVC, these fittings are built to withstand UV exposure, chemical fertilizers, and harsh weather conditions.
Secure "Bite": The sharp barb ridges are engineered to grip the inner wall of the tubing, providing a robust connection that holds firm even in temperature fluctuations.
Versatile Configurations: Available in a variety of reduction sizes (e.g., 3/4" x 1/2", 1" x 3/4") to match your specific system design.

Technical Specifications

Verified specifications for system planning.

Specification	Details
Product Type	Barbed Reducing Tee (Insert x Insert x Insert)
Connection Style	Barbed Insert (Fits Inside Tubing ID)
Material	Grey Schedule 40 PVC
Fastening Requirement	Requires Hose Clamps on ALL ends
Tubing Compatibility	Polyethylene (Oval Hose or Standard Poly)
Common Brand Names	Dura, Lasco
MPNs	1401-015 (1" x 1/2"), 1401-211 (1 1/2" x 1"), 1401-209 (1 1/2" x 1/2"), 1401-210 (1 1/2" x 3/4"), 1401-131 (1" x 3/4"), 1401-249 (2" x 1"), 1401-251 (2" x 1 1/2"), 1401-247 (2" x 1/2"), 1401-248 (2" x 3/4"), 1401-101 (3/4" x 1/2")

How to Install: A Step-by-Step Guide

Install your reducing tee correctly to ensure a leak-proof junction.

Step 1: Prep the Tubing
Cut your main line where the tee will be installed, and prepare your branch line. Ensure all cuts are square. For larger tubing, dip the ends in hot water to soften them for easier insertion.

Step 2: Position the Clamps
Slide a stainless steel Hose Clamp onto all three sections of tubing before inserting the fitting.

Step 3: Insert the Tee
Push the barbed ends firmly into the tubing. Ensure you match the correct tubing size to the correct port on the reducing tee (e.g., larger tubing on the run, smaller tubing on the branch).

Step 4: Secure the Connection
Slide the clamps into position over the barbs (do not clamp at the very edge). Tighten all three clamps firmly with a nut driver.

✔ Compatibility Check

Verify your sizing:

Insert Fittings: Sized by the tubing's Inside Diameter (ID).
Reducing Feature: Ensure you buy the tee that matches both your main line and your branch line sizes.
Clamps Required: You must use metal worm gear clamps for a reliable, pressure-rated seal.
It will NOT fit Drip Tape or threaded pipe directly.