The 3/4" Easy Loc Male Hose Tee is a strategic component for any well-designed drip system. These irrigation fittings connect two sections of 3/4" mainline tubing to a 1/2" Male Pipe Thread outlet.
This fitting is most frequently used to create a connection point from a 1/2" PVC riser or adapter to connect to 3/4" tubing.
Understanding compatibility is key. This fitting connects poly tubing to a hose thread accessory.
| Specification | Details |
|---|---|
| Product Type | 3/4" Easy Loc Tee with 1/2" Female Pipe Thread Outlet |
| Connection 1 & 2 (Run) | 3/4" Easy Loc (Fits .940" OD Tubing) |
| Connection 3 (Center Outlet) | 1/2" Female Pipe Thread (MHT) |
| Poly Tubing Compatibility | Fits .880" - .970" OD (Standard 3/4" Poly) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| Material | Polypropylene with Carbon Black/UV Stabilizers |
| MPN | A1-HT88FPT50 |
| Common Brand Names | Irritec, Perma-Loc |
Follow these steps to ensure a leak-proof connection.
Step 1: Prepare Tubing
Cut your 3/4" mainline tubing where you want the tee to be located. Ensure cuts are square.
Step 2: Unlock the Fittings
Rotate the Easy Loc locking collars backwards on both sides to expose the internal barbs. Do not remove the nuts completely.
Step 3: Connect Tubing
Push your 3/4" poly tubing over the barbs on both sides until they hit the stops. You may need to wiggle the tubing to get it over the lip.
Step 4: Lock it Down
Twist the locking collars forward over the tubing to clamp the fitting in place. Hand-tighten firmly.
Step 5: Attach Accessory
Screw the 1/2" female pipe thread onto your 1/2" male thread fitting.
Check your thread type carefully:
Ensure your Easy Loc system runs smoothly by having the right tools and accessories:
Sep 3rd 2026
Sep 2nd 2026
Sep 1st 2026
Aug 31st 2026
