The 3/4" Compression Coupler is the standard fitting for connecting two pieces of 3/4" poly tubing together. Whether you are extending a mainline run to reach a new garden bed or repairing a cut in your existing system, this coupler provides a fast, permanent solution.
Engineered for high-flow applications, this fitting features heavy-duty internal compression rings designed to grip the larger .940" OD tubing. As one of our most reliable irrigation fittings, it creates a leak-proof seal that withstands the pressures of large residential and commercial systems without the need for glue or clamps.
Verify tubing dimensions before purchasing.
| Specification | Details |
|---|---|
| Product Type | 3/4" Compression Coupler |
| Connection 1 | 3/4" Compression (Fits .940" OD Tubing) |
| Connection 2 | 3/4" Compression (Fits .940" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS Plastic |
| Manufacturer | NDS |
| MPN | CC 900 |
Installation requires force but no tools.
Step 1: Prep the Tubing
Cut your 3/4" poly tubing squarely at the connection point.
Important Tip: 3/4" tubing is stiff. Allow the ends to warm in the sun or dip them in hot water for 10-20 seconds to soften the plastic before installing.
Step 2: Insert First Side
Push the first tube into one end of the coupler. Rock the tubing back and forth while pushing firmly until it passes the internal resistance ring (approx. 3/4" deep).
Step 3: Connect Second Side
Repeat the process for the second piece of tubing to complete the connection.
Ensure this coupler fits your system:
Everything you need for a high-flow installation:
Apr 16th 2026
Apr 15th 2026
Apr 14th 2026
Apr 13th 2026
