The 1" Easy Loc Tee is the professional choice for splitting your heavy-duty mainline tubing into two separate directions. Designed to connect three sections of 1" Poly Tubing, this tee allows you to create efficient T-junctions in your irrigation layout without cutting corners on durability. Whether you are distributing water across a large agricultural field or navigating a complex landscape design, this fitting ensures a high-flow connection that won't leak.
As a premier example of our reusable irrigation fittings, the Easy Loc (Perma-Loc) system uses a locking nut that screws over the tubing to compress it against the barb. This mechanism is far superior to standard insert fittings, especially for 1" systems operating under pressure. To ensure the longevity of your system, always install a pressure regulator at your water source.
Designed for splitting 1" Drip Irrigation Mainlines.
| Specification | Details |
|---|---|
| Product Type | Tubing Tee (3-Way Connection) |
| Tubing Compatibility | Fits 1" Poly (.960" - 1.080" OD) |
| Operating Pressure | Up to 60 PSI |
| Material | UV-Resistant Polypropylene |
| Reusable | Yes |
| MPN | A1-HT111 |
| Common Brand Names | Irritec, Perma-Loc |
Create a secure branch in minutes.
Step 1: Prep the Tubing
Ensure all three ends of your 1" poly tubing are cut squarely. Clean off any dirt or grit.
Step 2: Unlock the Fittings
Rotate the locking nuts on all three sides of the tee backwards towards the center of the fitting to expose the barbs.
Step 3: Insert Tubing
Push the tubing onto the barbs until they hit the internal stops. Use a wiggling motion if the 1" tubing is stiff.
Step 4: Lock it Down
Twist the locking nuts forward over the tubing. Hand-tighten firmly to create a permanent seal.
Verify your tubing size before ordering:
Finish your 1" mainline installation with these matching parts:
Sep 9th 2026
Sep 8th 2026
Sep 3rd 2026
Sep 2nd 2026
