The Schedule 40 PVC Threaded Coupling is the standard solution for joining two male-threaded components in your water system. Featuring Female Pipe Threads (FIPT) on both ends, this fitting allows you to connect two pipe nipples, risers, or male adapters together, effectively extending the length of your manifold or repair line.
Ideal for building modular PVC irrigation systems, this coupler provides a strong, pressure-rated seal without the need for solvent cement (glue). Its threaded design allows for easy disassembly and system adjustments, making it a favorite for valve manifolds and pump stations.
Verify your connection types.
| Specification | Details |
|---|---|
| Product Type | Threaded Coupling (Coupler) |
| Connection 1 | Female Pipe Thread (FIPT) |
| Connection 2 | Female Pipe Thread (FIPT) |
| Material | White Schedule 40 PVC |
| Max Temperature | 140° F (Not for hot water) |
| Standards | ASTM D-1784, ASTM D-2466, NSF-PW |
| MPNs (Common Sizes) |
430-005 (1/2"), 430-007 (3/4"), 430-010 (1") |
Secure your threaded connections properly to prevent leaks.
Step 1: Inspect Threads
Check the male threads on your pipes or nipples for damage or debris. Clean if necessary.
Step 2: Apply Tape
Wrap thread seal tape around the male threads. Use 3-4 layers, wrapping clockwise (with the threads) to ensure the tape stays in place during tightening.
Step 3: Hand Tighten
Screw the coupling onto the first pipe by hand until it is snug.
Step 4: Final Tighten
Use a strap wrench or pliers to turn the coupling an additional 1-2 turns. Repeat for the second pipe connection. Avoid overtightening, as this can split female PVC threads.
Check your connection types:
Ensure a leak-free system with these essentials:
Dec 23rd 2025
Dec 19th 2025
Dec 18th 2025
Dec 17th 2025
