The Fiskars Pro PowerGear® Plastic Pipe Cutter (Model 740100-1002) is the go-to cutting tool for anyone installing or servicing an irrigation system. Whether you're trimming PVC lateral pipe, PEX tubing, polyethylene (PE) mainline, polybutylene (PB) pipe, or rubber hose, this cutter handles it cleanly in a single, smooth stroke — no ratcheting, no sawing, no mess. It's engineered specifically for the demands of real irrigation work: precise, repeatable cuts on a wide range of pipe materials, from 1/2" drip mainline all the way up to 1-1/4" outside diameter Schedule 40 PVC.
What makes the PowerGear® stand apart is Fiskars' patent-pending leverage-enhancing gear mechanism, which multiplies the force of your squeeze at the toughest point in the cut — delivering over 35% more cutting power than traditional bypass-style cutters. That means less hand fatigue on long installation days and clean, square cuts every time. The Easy Action™ spring-assisted handle opens automatically between cuts to keep your hand relaxed, while the Softgrip® handle provides secure control even in wet conditions. A rugged stainless steel exoskeleton protects the mechanism and prevents rust — essential for a tool that lives in the field around water. Blades are replaceable (replacement blade model: 710000-1002), so the tool stays sharp over thousands of cuts rather than ending up in the bin.
This cutter belongs in every sprinkler installer's toolkit. It pairs naturally with funny pipe and swing joints, mainline tubing, and the PVC fittings used throughout a sprinkler system. It also works great when cutting IPS poly pipe or Blu-Lock tubing to length in the field.
| Specification | Details |
|---|---|
| SKU (DripWorks) | APCUT |
| Manufacturer Part Number | 740100-1002 |
| UPC | 611618740105 |
| Brand | Fiskars |
| Maximum Cut Capacity | 1-1/4" Outside Diameter (OD) |
| Compatible Pipe Types | PVC (up to Schedule 40), PEX, PE, PB, rubber hose — 1/2", 3/4", and 1" nominal |
| Cutting Technology | PowerGear® patent-pending leverage-enhancing gear mechanism |
| Power Advantage | Over 35% more cutting power vs. traditional cutters |
| Cut Action | Single-stroke (no ratcheting required) |
| Blade Material | Stainless steel (polished; rust-resistant) |
| Replacement Blades | Yes — Fiskars model 710000-1002 |
| Handle | Easy Action™ spring-assisted with Softgrip® ergonomic coating |
| Frame / Exoskeleton | Stainless steel (maximizes durability; prevents rust) |
| Safety Lock | Easy-open lock for safe transport and storage |
| Warranty | Lifetime (Fiskars limited lifetime warranty) |
What pipe sizes and materials does this cutter work on?
The Fiskars PowerGear® cuts any plastic pipe up to 1-1/4" outside diameter, including 1/2", 3/4", and 1" nominal PVC (up to Schedule 40), PEX, polyethylene (PE), polybutylene (PB), and rubber hose. It is not designed for metal pipe or conduit.
What does "PowerGear® technology" actually mean?
Unlike a standard bypass cutter where your hand provides all the force throughout the cut, the PowerGear® mechanism uses an internal gear to multiply your squeezing force — specifically during the hardest part of the cut when the blade is deepest in the pipe wall. Fiskars' data shows this delivers over 35% more cutting power compared to traditional designs, which means less strain on your hand and a cleaner, more controlled cut.
Does it cut in one stroke, or do I have to ratchet?
One stroke. That's one of the key advantages over ratcheting-style cutters. The PowerGear® blade passes cleanly through the pipe in a single, continuous motion — producing a straighter, cleaner cut face that seats better in push-fit and compression fittings.
Can I replace the blades when they dull?
Yes. The blade is a standard replaceable component — Fiskars part number 710000-1002. Blade replacement is straightforward and dramatically extends the useful life of the tool, making it a better long-term investment than lower-cost disposable cutters.
Will this cutter work on Schedule 40 PVC?
Yes — it is rated for Schedule 40 PVC up to 1-1/4" OD. For most residential and light commercial sprinkler lateral lines (typically 1/2" or 3/4" Schedule 40), this cutter is ideal. For larger-diameter PVC mainline (1-1/2" or 2"), you will need a traditional hacksaw or reciprocating saw.
Is this the right tool for cutting funny pipe or swing joint tubing?
Yes. Funny pipe (also called poly flex pipe) is a flexible PE-based tubing typically available in 1/2" size — well within this cutter's range. It makes a great companion to the funny pipe and swing joints available at DripWorks.
Is this the same as the standard Fiskars PowerGear® Pipe Cutter (model 740100-1001)?
Yes, functionally identical. The 1002 suffix denotes the Pro version sold through professional and irrigation trade channels. Features, specifications, and compatible replacement blades are the same across both variants.
What is the warranty?
Fiskars backs this tool with a limited lifetime warranty to the original consumer purchaser, covering defects in materials and workmanship for as long as you own the product.
Pair the Fiskars PVC Cutter with these essential installation tools and components from DripWorks:
Apr 8th 2026
Apr 7th 2026
Apr 6th 2026
Apr 2nd 2026
