The Outlet Plug for FlexNet (Bag of 50) is an essential accessory for customizing your FlexNet Flexible Pipe system. These threaded plugs are designed to screw directly into the 1/2" integral welded outlets of the pipe, allowing you to close off specific ports where water is not needed. This is particularly useful for skipping crop rows, creating access paths, or temporarily reducing the number of active laterals in your field.
Sold in a cost-effective 50-pack bag, these irrigation fittings are molded from durable, chemical-resistant polypropylene. We strongly recommend applying thread sealant tape to the threads before installation to ensure a completely leak-proof seal that maintains system pressure.
Key details for system configuration.
| Specification | Details |
|---|---|
| Product Type | Threaded Plug |
| Thread Size | 1/2" Male Pipe Thread (MPT) |
| Quantity | 50 Plugs per Bag |
| Material | Polypropylene |
| Head Type | Flat / Recessed (Tool or Hand Tighten) |
| MPN | 42000-027105 |
| Common Brand Names | Netafim |
Plug outlets in seconds.
Step 1: Apply Tape
Wrap thread seal tape clockwise around the male threads of the plug. This is critical for preventing slow leaks.
Step 2: Insert Plug
Screw the plug into the unused 1/2" Female Pipe Thread outlet on your FlexNet pipe.
Step 3: Tighten
Hand-tighten securely. If needed, use a tool appropriate for the head type (often a broad screwdriver or hex key) to give it a final quarter-turn. Do not overtighten.
Ensure this plug fits your system:
Maintain your FlexNet system with these recommended items:
Jan 22nd 2026
Jan 21st 2026
Jan 20th 2026
Jan 19th 2026
