Landscape
How to Install a French Drain: DIY Guide
Oct 16th 2026
A beautiful lawn and garden can become a frustrating mess when water has nowhere to go. A properly i
…
See More
The FlexNet Tape Elbow Start Connector (1/2" MPT x 5/8" Tape) is the specialized fitting designed to connect 5/8" drip tape laterals perpendicular to your FlexNet Flexible Pipe. By screwing directly into the integral 1/2" threaded outlets of the FlexNet submain, this elbow keeps your tape flat and parallel to the row, reducing stress on the connection point and minimizing trip hazards in the furrow.
Featuring a high-quality twist-lock nut, this connector secures standard 5/8" Drip Tape (16mm) tightly to prevent blowouts under pressure. As one of our most popular irrigation fittings for vegetable production and row crops, it ensures a leak-proof transition from the portable manifold to the crop zone without the need for glues or tools.
Key dimensions for system compatibility.
| Specification | Details |
|---|---|
| Product Type | Start Connector / Elbow |
| Inlet Connection | 1/2" Male Pipe Thread (MPT) |
| Outlet Connection | 5/8" Tape Loc (Fits Standard 16mm Drip Tape) |
| Locking Mechanism | Twist Lock Nut |
| Material | Polypropylene |
| MPN | N/A |
| Common Brand Names | Netafim |
Connect your drip tape in three easy steps.
Step 1: Install into FlexNet
Apply thread seal tape to the 1/2" MPT threads. Screw the elbow into the FlexNet outlet until hand-tight, positioning the outlet in the direction of your row.
Step 2: Prepare the Lock
Spin the locking nut on the tape side of the fitting backwards (towards the elbow) to expose the barb.
Step 3: Connect Tape
Slide your 5/8" drip tape over the barb. Twist the locking nut forward (over the tape) until tight. Pull gently on the tape to verify it is secure.
Verify your tape size:
Ensure a successful row crop installation with these components:
Oct 16th 2026
Oct 15th 2026
Oct 13th 2026
Oct 12th 2026