Orbit 62100 Yard Enforcer

Orbit 62100 Yard Enforcer® – Full Specifications

What animals will the Yard Enforcer deter?
The Yard Enforcer is effective against a wide range of common yard and garden pests, including deer, rabbits, squirrels, mice, rats, birds, cats, dogs, skunks, and opossums. Because it uses only water and noise, it can be safely used even if the animal is a protected species — no harm is done, just a startling burst of water and sound.

How does the motion sensor work?
The Yard Enforcer uses a 120° passive infrared (PIR) sensor that detects both heat and motion. When a warm, moving object (such as an animal) enters the detection zone, the valve opens and the impact sprinkler fires a 3–5 second burst of water. The detection range is adjustable up to 40 feet, and you can rotate the sensor housing to aim it precisely at the area you want to protect.

What are the detection mode options?
You can set the Yard Enforcer to one of four operating modes using the main dial: Day Only (active during daylight hours), Night Only (active after dark), Always On (24-hour protection), or Off. Most garden pests are most active at dawn, dusk, and overnight, so Night Only or Always On modes are typically the most effective.

What is Intelligent Sensing?
Intelligent Sensing is a built-in conservation feature that automatically lengthens the time between valve activations if the same area keeps triggering the sensor. This prevents the unit from constantly firing at a stationary object (like a moving branch) and conserves both water and battery life. You can disable Intelligent Sensing if desired by holding the 30-Minute Water Cycle button for 20 seconds while the dial is in the Off position.

Can I expand coverage beyond one unit?
Yes — the Yard Enforcer features a unique flow-through riser with dual side outlets. You can attach additional hoses and impact sprinklers to these outlets, and all connected sprinklers will fire simultaneously when the sensor is triggered. A single unit covers up to 1,600 sq. ft.; with expansion sprinklers, coverage can reach up to 3,840 sq. ft. in a full circle.

Can I use it as a regular watering sprinkler?
Absolutely. In addition to its pest deterrence function, the Yard Enforcer includes a 30-minute timed watering cycle. Press the dedicated button to activate a continuous 30-minute watering session, completely independent of motion detection. This makes it a dual-purpose tool — pest deterrent and garden irrigator in one.

How do I connect it to my hose?
The Yard Enforcer connects directly to any standard garden hose via its 3/4" GHT brass hose connection. Simply thread your hose onto the inlet at the base of the step-spike. The brass connection resists rust and corrosion. DripWorks carries a full selection of hoses and hose fittings if you need a longer reach.

How do I prepare it for winter?
Before your first hard frost, disconnect the Yard Enforcer from the hose, remove the batteries, drain all water from the unit, and store it indoors in a dry location. Leaving water inside the unit in freezing temperatures can cause permanent damage. See DripWorks' winterization products for additional cold-weather prep supplies.

What batteries does it use and how long do they last?
The Yard Enforcer requires 4 AA alkaline batteries (not included). Orbit rates battery life at up to 7,500 activation cycles per set. Actual battery life will vary based on frequency of activation and whether Intelligent Sensing is enabled. Only use fresh alkaline batteries — do not mix old and new batteries or use rechargeable batteries.