The Hydro-Rain 3/4" Blu-Lock Bull Tee is the professional's solution for splitting a 1" supply line into two 3/4" lateral lines. A "Bull Tee" is uniquely designed with the branch (center) connection larger than the run (side) connections. This allows you to bring high-volume water in from a 1" zone line and distribute it effectively to two smaller 3/4" headers or Blu-Lock tubing runs.
Eliminate the need for messy primers and glues. These heavy-duty irrigation fittings utilize a stainless steel retainer ring to grip the pipe instantly, reducing installation time by up to 70% compared to traditional PVC or poly insert fittings.
Configuration: 3/4" Run x 3/4" Run x 1" Bull (Center).
| Specification | Details |
|---|---|
| Product Type | Bull Tee (Reducing Tee) |
| Connection 1 (Side) | 3/4" Blu-Lock |
| Connection 2 (Side) | 3/4" Blu-Lock |
| Connection 3 (Center) | 1" Blu-Lock |
| Operating Pressure | 100+ PSI (Matches Pipe Rating) |
| Release Mechanism | Requires Release Tool (Not built-in) |
| MPN | BL-401-102 |
| Common Brand Names | Hydro-Rain, Blu-Lock |
Secure connections in four easy steps.
Step 1: Prep the Pipe
Cut your 1" and 3/4" Blu-Lock tubing cleanly and squarely. A jagged cut can damage the internal O-ring.
Step 2: Clean
Wipe the end of the pipe to remove dirt, mud, or grit. Debris can compromise the seal.
Step 3: Push to Connect
Insert the pipe firmly into the fitting until it bottoms out. You will feel resistance as it passes the grip ring.
Step 4: Verify
Pull back on the pipe to ensure it is locked. Note: Unlike 1/2" fittings, these sizes require a Blu-Lock Release Tool if you need to disconnect them.
Ensure you have the correct tubing sizes:
Don't forget these essential tools and components:
Aug 6th 2026
Aug 5th 2026
Aug 4th 2026
Aug 3rd 2026
