Galcon 62512S Outdoor DC Controller, 12 Station

Get your 12-station battery controller running smoothly.

Step 1: Mount the Controller
Select an appropriate outdoor wall or post location. Use the provided mounting hardware to securely attach the weather-resistant housing in an easily accessible spot.

Step 2: Install Batteries
Open the battery compartment and install four fresh 9-volt industrial alkaline batteries to power the unit.

Step 3: Wire the Valves
Run direct burial wire from the controller to your valve manifolds. Connect the wires from your Galcon DC 2-wire latching solenoids into the designated station terminals inside the controller housing.

Step 4: Program Your Zones
Use the interface to set the current time and day. Then, select either standard irrigation or cyclical misting mode, and program independent watering durations and start times for each of the 12 stations.

Does the Galcon 62512S require an electrical outlet?
No, the Galcon 62512S is a DC-powered timer that operates entirely on four 9-volt alkaline batteries. This makes it perfect for remote sites, greenhouses, and areas without AC power access.

Because it is battery operated, it must be paired specifically with DC latching solenoids, not standard 24V AC valves.

Can the Galcon 62512S controller be used for greenhouse misting?
Yes, the Galcon 62512S features a cyclical programming mode with 10-second increments, making it highly effective for automating extensive greenhouse misting and propagation systems.

This precise short-duration watering prevents over-saturation while maintaining ideal humidity levels for delicate clones and seedlings across up to 12 different zones.

Is the Galcon 62512S timer waterproof?
The Galcon 62512S features a sturdy, weather-resistant housing designed for outdoor wall mounting. While highly protected against rain and sprinklers, it is not fully submersible and should not be placed underwater.

For completely submersible applications inside a flooded valve box, look for fully potted single-station IP68 controllers instead.

How should I prepare my Galcon 62512S for spring watering?
Prepare the Galcon 62512S for spring by installing four fresh 9-volt alkaline batteries, checking all valve wire connections, and programming a conservative schedule that you can adjust as the weather warms.

If you experience heavy spring rains, use the controller's manual adjustments or attach a rain sensor to prevent unnecessary watering and save battery life.