The Female Hose Swivel x 1/4" Female Pipe Adapter is a specialized fitting designed primarily for checking water pressure at a hose bib or garden hose end. By converting a standard garden hose connection to a small 1/4" Female Pipe Thread (FPT), it allows you to screw in a standard pressure gauge and get an instant reading of your static water pressure.
Featuring a convenient swivel hose connection, this adapter can be easily attached to a faucet or the end of a "Hose Y" without rotating the gauge itself. It is one of our most essential diagnostic irrigation fittings, helping you determine if you need a pressure regulator or a booster pump for your system.
Key sizing for pressure testing components.
| Specification | Details |
|---|---|
| Product Type | Gauge Adapter (Hose to 1/4" Pipe) |
| Connection 1 (Inlet) | 3/4" Female Hose Thread (FHT) Swivel |
| Connection 2 (Outlet) | 1/4" Female Pipe Thread (FPT) |
| Material | Plastic (Black) |
| MPN | A5-F255 |
| Common Brand Names | Irritec |
Follow these steps to build a pressure testing assembly.
Step 1: Tape the Gauge
Apply thread seal tape to the 1/4" Male Pipe Threads of your pressure gauge.
Step 2: Attach to Adapter
Screw the gauge into the small 1/4" opening of the adapter. Hand-tighten securely (use a wrench gently if needed, but do not crack the plastic).
Step 3: Connect to Water Source
Ensure a hose washer is inside the swivel nut. Screw the adapter onto your hose bib or hose end. Open the valve to read the pressure.
Verify before buying:
Build your pressure testing kit:
Aug 20th 2026
Aug 19th 2026
Aug 18th 2026
Aug 17th 2026
