The 1/2" Easy Loc Male Hose Tee is a versatile fitting designed to add a 3/4" Male Hose Thread (MHT) outlet to your 1/2" poly tubing line. This configuration is most commonly used to create a "flush valve" at the low point of a system—simply attach a hose cap to the threaded outlet, and unscrew it periodically to flush out debris. Alternatively, it can be used to attach a garden hose to charge a specific zone of your drip system.
As one of our most adaptable irrigation fittings, this tee features the secure Easy Loc locking collar system on the tubing connections. The collars screw over the tubing to lock it against the barb, providing a leak-proof seal that is fully reusable. The threaded outlet is a standard 3/4" MHT, compatible with any standard garden hose or hose-threaded accessory.
Note the thread type carefully.
| Specification | Details |
|---|---|
| Product Type | Tee with Threaded Outlet |
| Run Connections (Ends 1 & 2) | Fit 1/2" Poly Tubing (.700" OD) |
| Branch Connection (Middle) | 3/4" Male Hose Thread (MHT) |
| Operating Pressure | 0 - 60 PSI |
| Material | UV Stabilized Polypropylene |
| MPN | A1-HT66HT |
| Common Brand Names | Irritec, Perma-Loc |
Install inline for easy access.
Step 1: Prep Tubing
Cut your 1/2" poly tubing at the location where you need a hose connection or flush point.
Step 2: Connect Tubing
Unlock the Easy Loc collars on the side ports. Push the tubing over the barbs until stopped, then twist the collars forward to lock.
Step 3: Attach Accessory
Screw your hose cap, garden hose, or vacuum breaker onto the 3/4" Male Hose Threads. Hand-tighten only.
Tip: Use a hose washer inside the cap or hose connector to prevent leaks at the threads.
Verify your threads and tubing size:
Essential add-ons for this fitting:
Mar 25th 2026
Mar 24th 2026
Mar 23rd 2026
Mar 19th 2026
