As late spring turns into the heat of summer, keeping your outdoor spaces comfortable and your greenhouse plants safe from heat stress is essential. The Cool Breeze Misting Nozzle (5-Pack) provides an incredibly efficient, low-flow, wide-angled spray designed perfectly for cooling large areas. Emitting only 3/4 or 1 gallon per hour, it drops ambient temperatures through rapid evaporation without soaking the area below. Available with either a 1/4" barbed base for quick insertion into poly tubing or a 10-32 threaded base for rigid PVC setups, these versatile nozzles are ideal for everything from dog runs to backyard patios. Pair them with 1/2" mainline tubing overhead to build your ultimate summer oasis.
Review the exact performance metrics to choose the right misting nozzle configuration.
| Part # | Connection Type & Flow | Spray Diameter |
|---|---|---|
| MND34B | 1/4" Barb (3/4 GPH) | 2.5 Feet |
| MND1B | 1/4" Barb (1 GPH) | 3.0 Feet |
| MND34T | 10-32 Threaded (3/4 GPH) | 2.5 Feet |
| MND1T | 10-32 Threaded (1 GPH) | 3.0 Feet |
Build your cooling system quickly depending on your chosen base style.
Step 1: Prep Your Overhead Line
Suspend your supply line (such as 1/2-inch poly tubing) above the area you want to cool, like a patio perimeter or dog run.
Step 2: Create an Insertion Point
If using poly tubing, use a key punch tool to puncture holes precisely where you want each misting nozzle placed.
Step 3: Insert the Nozzle
Barb Models (MND34B, MND1B): Push the 1/4-inch barb directly into the punched hole in your poly tubing until it snaps tight.
Threaded Models (MND34T, MND1T): Twist the 10-32 threads directly into a tapped PVC pipe, rigid riser, or compatible threaded component.
Step 4: Check Pressure
Turn on the water supply. Ensure your system pressure is at least 35 PSI (up to 80 PSI) to atomize the water into a fine, cooling mist.
Can I use the Cool Breeze Misting Nozzle to cool my patio this summer?
Yes, the Cool Breeze Misting Nozzle is perfect for patio cooling. Its ultra-low flow design produces a fine mist that quickly evaporates, dropping the air temperature without soaking you or your outdoor furniture.
It's also highly popular for cooling down dog runs, barns, and outdoor party spaces during the peak heat of summer.
What pressure is required to operate the Cool Breeze Misting Nozzle?
These nozzles require higher pressure to atomize water. They operate optimally between 35 and 80 PSI. Standard residential water pressure is usually sufficient to create a fine, cooling mist.
Should I choose the barbed or threaded Cool Breeze Misting Nozzle?
The 1/4-inch barb base is best for pushing directly into standard poly drip tubing. The 10-32 threaded base is ideal if you are screwing the nozzle into rigid risers or tapped PVC pipe.
Will the Cool Breeze Misting Nozzle soak the ground under my dog run?
No, these are extremely low-flow nozzles emitting just 3/4 or 1 GPH. At the correct pressure (35+ PSI), the fine mist mostly evaporates in the air before hitting the ground, providing cooling without puddles.
Please note the requirements for this unit:
Ensure your patio or greenhouse cooling setup operates flawlessly with these required components:
May 7th 2026
May 6th 2026
May 5th 2026
May 4th 2026
